Crankshaft Front Seal - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 1U-7600     | 滑锤拉拔器     | 1     |
B     | 1U-8145     | 钻头     | 1     |
开始:
- 拆卸减振器和皮带轮。 请参阅拆解和组装, "减振器和皮带轮 - 拆卸和安装"。
- 拆下螺栓 (1) 和发动机支架 (2) 。
Show/hide table
图 1 | g01151453 |
- 拆下螺栓 (3) 和发动机耳轴 (4) 。
Show/hide table
图 2 | g01151455 |
- 使用工具 (B) ,在曲轴前油封 (5) 上小心钻出三个等距的孔。
Show/hide table
图 3 | g01151456 |
- 交替在钻孔间使用工具 (A) ,拆下曲轴前油封 (5) 。
Caterpillar Information System:
C9 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
C9 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
854K Wheel Dozer and 992K Wheel Loader Electric Starting Motor - Remove and Install
854K Wheel Dozer and 992K Wheel Loader Alternator - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
C9 Engines for Caterpillar Built Machines Water Pump - Install
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines Water Pump - Remove
C27 and C32 Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C9 Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
C9 Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
C9 Engines for Caterpillar Built Machines Front Cover - Remove
3512C Engine Product Description
2005/03/28 Engine Rerate Procedure {1000}
3512C Engine Specifications
C280 Marine and Petroleum Engines Coolant Temperature Sensor - Test
C7.1-XQ230 Rental Generator Set Overhaul Considerations
XQ60 Rental Generator Set Engine Identification
3512C Engine Overhaul Considerations
C9 Engines for Caterpillar Built Machines Front Cover - Install
C280 Marine and Petroleum Engines Fuel System Operation
C280 Marine Engines Fuel Injector Mechanism