Vibration Damper and Pulley - Remove and Install
拆卸步骤
- 拆下皮带。 请参阅操作和保养手册, "皮带 - 检查/更换"。
- 从曲轴减振器 (1) 拆下螺栓 (2) 。 从曲轴皮带轮上拆下曲轴减振器 (1) 。
Show/hide table
图 1 | g01151434 |
- 拆下螺栓 (3) 。 拆下曲轴皮带轮 (4) 。
安装步骤
- 在曲轴上定位曲轴皮带轮 (4) 。 安装螺栓 (3) 。 用 190 ± 30 N·m (140 ± 22 lb ft) 的扭矩拧紧螺栓 (3) 。
Show/hide table
图 2 | g01151434 |
- 将曲轴减振器 (1) 安置在曲轴皮带轮 (4) 上。 安装螺栓 (2) 。
- 安装皮带。 请参阅操作和保养手册, "皮带 - 检查/更换"。
Caterpillar Information System:
C9 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
854K Wheel Dozer and 992K Wheel Loader Electric Starting Motor - Remove and Install
854K Wheel Dozer and 992K Wheel Loader Alternator - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
C9 Engines for Caterpillar Built Machines Water Pump - Install
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines Water Pump - Remove
C27 and C32 Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C9 Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
C27 and C32 Engines for Caterpillar Built Machines Fuel Temperature Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
C9 Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
C9 Engines for Caterpillar Built Machines Front Cover - Remove
3512C Engine Product Description
2005/03/28 Engine Rerate Procedure {1000}
3512C Engine Specifications
C280 Marine and Petroleum Engines Coolant Temperature Sensor - Test
C7.1-XQ230 Rental Generator Set Overhaul Considerations
XQ60 Rental Generator Set Engine Identification
3512C Engine Overhaul Considerations
C9 Engines for Caterpillar Built Machines Front Cover - Install
C280 Marine and Petroleum Engines Fuel System Operation