Flywheel Housing - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7575     | 连杆支架     | 2     |
开始:
- 拆下飞轮。 请参阅拆解和组装, "飞轮 - 拆卸"。
- 拆下电起动马达。 请参阅拆解和组装, "电起动马达 - 拆卸和安装"。
- 将工具 (A) 和适当的起吊设备固定到飞轮壳 (1) 上。 飞轮壳 (1) 的重量约为 37 kg (82 lb)。
Show/hide table
图 1 | g01151394 |
- 拆下螺栓 (2) 。 拆下螺栓 (3) 。
- 拆下将发动机油底壳固定在飞轮壳 (1) 上的螺栓 (4) (图上未显示)。 拆下飞轮壳 (1) 。
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7575     | 连杆支架     | 2     |
B     | 1U-8846     | 密封垫密封胶     | 1     |
- 安装之前先在飞轮壳整个安装面上涂抹工具 (B) 。
- 将工具 (A) 和适当的起吊设备固定到飞轮壳 (1) 上。 飞轮壳 (1) 的重量约为 37 kg (82 lb)。 在发动机缸体上定位飞轮壳 (1) 。
Show/hide table
图 2 | g01151394 |
- 安装螺栓 (2) 。 安装螺栓 (3) 。
- 安装将发动机油底壳固定在飞轮壳 (1) 上的螺栓 (4) (图上未显示)。
End By:
- 安装电起动马达。 请参阅 拆解和组装, "电起动马达 - 拆卸和安装"。
- 安装飞轮。 请参阅 拆解和组装, "飞轮 - 安装"。
Caterpillar Information System:
854K Wheel Dozer and 992K Wheel Loader Electric Starting Motor - Remove and Install
854K Wheel Dozer and 992K Wheel Loader Alternator - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
C9 Engines for Caterpillar Built Machines Water Pump - Install
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines Water Pump - Remove
C27 and C32 Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C9 Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
C27 and C32 Engines for Caterpillar Built Machines Fuel Temperature Sensor - Remove and Install
C9 Generator Set Engines Flywheel Housing
C9 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
C9 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
C9 Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
C9 Engines for Caterpillar Built Machines Front Cover - Remove
3512C Engine Product Description
2005/03/28 Engine Rerate Procedure {1000}
3512C Engine Specifications
C280 Marine and Petroleum Engines Coolant Temperature Sensor - Test
C7.1-XQ230 Rental Generator Set Overhaul Considerations
XQ60 Rental Generator Set Engine Identification
3512C Engine Overhaul Considerations
C9 Engines for Caterpillar Built Machines Front Cover - Install