Crankshaft Front Seal - Install
安装步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件说明 | 数量 |
| C | 1U-7430 | 前油封安装工具 | 1 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (C) 安装曲轴前油封 (5) 。
Show/hide table
 | |
| 图 1 | g01151527 |
注: 曲轴油封的设计在安装时必须干躁。
- 安置发动机耳轴 (4) 并安装螺栓 (3) 。 用 105 ± 20 N·m (77 ± 15 lb ft) 的扭矩拧紧螺栓 (3) 。
Show/hide table
 | |
| 图 2 | g01151455 |
- 安置发动机支架 (2) 并安装螺栓 (1) 。
Show/hide table
 | |
| 图 3 | g01151453 |
End By: 安装减振器和皮带轮。 请参阅 拆解和组装, "减振器和皮带轮 - 拆卸和安装"。
Caterpillar Information System:
C9 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
C9 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
C9 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
854K Wheel Dozer and 992K Wheel Loader Electric Starting Motor - Remove and Install
854K Wheel Dozer and 992K Wheel Loader Alternator - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
C9 Engines for Caterpillar Built Machines Water Pump - Install
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines Water Pump - Remove
C27 and C32 Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C9 Engines for Caterpillar Built Machines Front Cover - Remove
3512C Engine Product Description
2005/03/28 Engine Rerate Procedure {1000}
3512C Engine Specifications
C280 Marine and Petroleum Engines Coolant Temperature Sensor - Test
C7.1-XQ230 Rental Generator Set Overhaul Considerations
XQ60 Rental Generator Set Engine Identification
3512C Engine Overhaul Considerations
C9 Engines for Caterpillar Built Machines Front Cover - Install
C280 Marine and Petroleum Engines Fuel System Operation
C280 Marine Engines Fuel Injector Mechanism
C280 Marine and Petroleum Engines Fuel Injector