Cab Door
Show/hide table
 | |
| Illustration 1 | g00688918 |
Show/hide table
 | |
| Illustration 2 | g00688916 |
Cab Doors - Pull the exterior door latch (1) in order to open the door from the outside. Pull back on the interior door latch (2) in order to open the door from the inside. Open the door all the way to the fully open position. The door will remain in this position. Both doors operate the same way.
The doors should be closed while you operate the machine. While the doors are shut, the windows can be opened for better cab airflow.
Show/hide table
 | |
| Illustration 3 | g00688920 |
Cab Door Release Button - Push the button inward in order to release the cab door from the open position. Both doors operate the same way.
Caterpillar Information System:
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
994D Wheel Loader Battery - Clean
651E and 657E Wheel Tractor-Scrapers Air System and Brakes Solenoid Valve (Apron)
988G Wheel Loader Engine Supplement Engine Oil Cooler - Remove - Engine In Chassis
988G Wheel Loader Engine Supplement Engine to Torque Converter - Connect
988G Wheel Loader Engine Supplement Engine from Torque Converter - Separate
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
2000/03/27 A Stronger Carrier Roller Mounting Bracket Improves Reliability {4154}
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel System - Prime
545 Wheel Skidder Refrigerant Accumulator (With Desiccant) - Replace
D6M Track-Type Tractor Product Identification Number, Serial Number and EU's CE Plate Locations
D6M Track-Type Tractor Maintenance Interval Schedule
2000/08/14 A New Relief Valve for the Gear Motor (Fan Drive) Improves the Accuracy of Fan Speed {5069}
988G Wheel Loader Engine Supplement Engine Oil Cooler - Install - Engine In Chassis
651E and 657E Wheel Tractor-Scrapers Hydraulic System Ejector Valve (Speed Change) - If Equipped
988G Wheel Loader Electrohydraulic System Position Sensor (Lift Linkage and Tilt Linkage)
910G HYSTAT Wheel Loader Starting Above 0°C (32°F)
910G HYSTAT Wheel Loader Starting Below 0°C (32°F) with Thermal Starting Aid
651E and 657E Wheel Tractor-Scrapers Air System and Brakes General Information
3524B Engines for Off-Highway Trucks Excessive Black Smoke
963B Track-Type Loader Engine Valve Lash - Check
980G Wheel Loader Steering System Relief Valve (Steering Cylinder Crossover) - Test and Adjust
651E and 657E Wheel Tractor-Scrapers Hydraulic System Sequence and Pressure Control Valve (Apron)
3064 and 3066 Engines for Caterpillar Built Machines Cooling System - Inspect