Engine to Torque Converter - Connect
Connection Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
B     | 138-7574     | Link Bracket     | 2     |
- Thoroughly clean the mating surfaces of the torque converter and the engine prior to the connection.
- Replace the O-ring seals that are used in the installation of the torque converter. Use new parts for the replacement.
- Install the O-ring seal that is between the engine and the torque converter.
- Lubricate the O-ring seal slightly with clean transmission oil.
- Attach Tooling (B) to torque converter (1). Attach a hoist and suitable lifting chains to Tooling (B) .
Show/hide table
Illustration 1 | g00688790 |
- Use a hoist to align torque converter (1) to the engine for the connection. The weight of the torque converter is 635 kg (1400 lb).
- Fasten the torque converter to the engine with eleven bolts (2). The torque for the bolts is 240 ± 40 N·m (175 ± 30 lb ft).
Show/hide table
Illustration 2 | g00688791 |
End By: Install the engine and the torque converter assembly. Refer to Disassembly and Assembly, "Engine and Torque Converter - Install".
Caterpillar Information System:
988G Wheel Loader Engine Supplement Engine from Torque Converter - Separate
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
2000/03/27 A Stronger Carrier Roller Mounting Bracket Improves Reliability {4154}
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel System - Prime
545 Wheel Skidder Refrigerant Accumulator (With Desiccant) - Replace
D6M Track-Type Tractor Product Identification Number, Serial Number and EU's CE Plate Locations
D6M Track-Type Tractor Maintenance Interval Schedule
988G Wheel Loader Engine Supplement Engine and Torque Converter - Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel System Pressure - Test
910G HYSTAT Wheel Loader Stopping the Engine
3054 Engine Air in Fuel - Test
910G HYSTAT Wheel Loader Stopping the Machine
988G Wheel Loader Engine Supplement Engine Oil Cooler - Remove - Engine In Chassis
651E and 657E Wheel Tractor-Scrapers Air System and Brakes Solenoid Valve (Apron)
994D Wheel Loader Battery - Clean
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
910G HYSTAT Wheel Loader Cab Door
2000/08/14 A New Relief Valve for the Gear Motor (Fan Drive) Improves the Accuracy of Fan Speed {5069}
988G Wheel Loader Engine Supplement Engine Oil Cooler - Install - Engine In Chassis
651E and 657E Wheel Tractor-Scrapers Hydraulic System Ejector Valve (Speed Change) - If Equipped
988G Wheel Loader Electrohydraulic System Position Sensor (Lift Linkage and Tilt Linkage)
910G HYSTAT Wheel Loader Starting Above 0°C (32°F)
910G HYSTAT Wheel Loader Starting Below 0°C (32°F) with Thermal Starting Aid
651E and 657E Wheel Tractor-Scrapers Air System and Brakes General Information