992G Wheel Loader and 854G Wheel Dozer Braking System Caterpillar


Oil Filter (Case Drain)

Usage:

854G 1JW



Illustration 1g00670127

Maximum operating pressure ... 2758 kPa (400 psi)

Pressure setting for the hydraulic oil filter bypass valve ... 172 kPa (25 psi)

Caterpillar Information System:

3056 Engine for Caterpillar Built Machines Crankshaft - Install
924G and 924Gz Wheel Loaders Power Train Transmission Pressures - Test and Adjust
C-9 Engines for Caterpillar Built Machines Excessive Engine Oil Consumption - Inspect
3056 Engine for Caterpillar Built Machines Crankshaft - Remove
924G and 924Gz Wheel Loaders Power Train NoSPIN Differential - Test
924G and 924Gz Wheel Loaders Power Train Limited Slip Differential Disc End Play Check - Check
3056 Engine for Caterpillar Built Machines Connecting Rod Bearings - Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Water Pump - Remove - 3013, 3014, and 3024 Engines
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Water Pump - Install - 3013, 3014, and 3024 Engines
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Bucket Volume Entering
924G and 924Gz Wheel Loaders Power Train Axle Housing and Bearing Preload - Adjust
988G Wheel Loader Machine Systems Blower Motor (Air Conditioner, Heater) - Remove
631E Series II, 633E Series II and 637E Series II Wheel Tractor Power Train Torque Converter Outlet Relief Valve Pressure - Test
C-9 Engines for Caterpillar Built Machines Cooling System - Check - Overheating
515 Wheel Skidder and 525 Wheel Skidder Hydraulic and Steering System Control Valve (Hydraulic Retrieval Device)
902 and 906 Compact Wheel Loaders Machine Systems Window Wiper Motor (Rear) - Remove
C-9 Engines for Caterpillar Built Machines Cooling System - Test
992G Wheel Loader and 854G Wheel Dozer Steering System Pressure Switch (Filter Bypass)
C-9 Engines for Caterpillar Built Machines Water Pump - Test
Installing New Components for a Kickout and Positioner on a Track Loader{5109, 5112, 5132} Installing New Components for a Kickout and Positioner on a Track Loader{5109, 5112, 5132}
D9R Track-Type Tractor Lifting and Tying Down the Machine
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Carryback Weight Entering
992G Wheel Loader and 854G Wheel Dozer Steering System Relief Valve (Steering Pilot)
824G , 825G and 826G Landfill Compactor Maintenance Interval Schedule
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.