C-9 Engines for Caterpillar Built Machines Caterpillar


Water Pump - Test

Usage:

TK711 101

表 1
需要的工具 
零件号  零件名  数量 
6V-7775  气压表 


图 1g01112112
典型单水温调节器壳体
(1) 孔口


图 2g01112115
典型双水温调节器壳体
(1) 孔口

------ WARNING! ------

接触正在运转的发动机会因热零件而导致灼伤或因旋转零件而导致伤害。

在旋转的发动机上工作时,避免接触热零件或旋转零件。


进行下述程序以确定水泵是否正常工作:

  1. 从孔口 (1) 处拆下孔塞。

  2. 6V-7775 气压表 安装到孔口 (1)上。

  3. 起动发动机。 运转发动机,直到冷却液温度处于工作温度。

  4. 记录水泵压力。 水泵压力应在 100 至 125 kPa (15 至 18 psi) 的范围内。

Caterpillar Information System:

992G Wheel Loader and 854G Wheel Dozer Steering System Pressure Switch (Filter Bypass)
C-9 Engines for Caterpillar Built Machines Cooling System - Test
902 and 906 Compact Wheel Loaders Machine Systems Window Wiper Motor (Rear) - Remove
515 Wheel Skidder and 525 Wheel Skidder Hydraulic and Steering System Control Valve (Hydraulic Retrieval Device)
C-9 Engines for Caterpillar Built Machines Cooling System - Check - Overheating
631E Series II, 633E Series II and 637E Series II Wheel Tractor Power Train Torque Converter Outlet Relief Valve Pressure - Test
992G Wheel Loader and 854G Wheel Dozer Braking System Oil Filter (Case Drain)
3056 Engine for Caterpillar Built Machines Crankshaft - Install
924G and 924Gz Wheel Loaders Power Train Transmission Pressures - Test and Adjust
C-9 Engines for Caterpillar Built Machines Excessive Engine Oil Consumption - Inspect
3056 Engine for Caterpillar Built Machines Crankshaft - Remove
924G and 924Gz Wheel Loaders Power Train NoSPIN Differential - Test
Installing New Components for a Kickout and Positioner on a Track Loader{5109, 5112, 5132} Installing New Components for a Kickout and Positioner on a Track Loader{5109, 5112, 5132}
D9R Track-Type Tractor Lifting and Tying Down the Machine
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Carryback Weight Entering
992G Wheel Loader and 854G Wheel Dozer Steering System Relief Valve (Steering Pilot)
824G , 825G and 826G Landfill Compactor Maintenance Interval Schedule
980G Wheel Loader Braking System Limit Switch (Transmission Neutralizer)
3056 Engines Piston and Rings
924G and 924GZ Wheel Loaders Hydraulic System Ride Control Accumulator
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Calibration Weight Entering
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Weigh Range Adjusting
3056 Engines Engine Oil Cooler
3054 and 3056 Industrial and Generator Set Engines Front Housing and Covers
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.