Ride Control Accumulator
Show/hide table
 | |
| Illustration 1 | g00909911 |
Precharge pressure of nitrogen at 21 °C (70 °F) ... 2446 ± 172 kPa (355 ± 25 psi)
Working pressure ... 27560 kPa (4000 psi)
Working temperature range ... -40 to 93 °C (-40 to 199 °F)
Internal volume of compartment for nitrogen ... 1.900 L (116 in3)
Burst pressure ... 110024 kPa (16000 psi)
223-9699 Ride Control Accumulator Gp
Precharge pressure of nitrogen ... Uncharged
Working pressure ... 27560 kPa (4000 psi)
Working temperature range ... -40 to 93 °C (-40 to 199 °F)
Internal volume of compartment for nitrogen ... 1.900 L (116 in3)
Burst pressure ... 110024 kPa (16000 psi)
Caterpillar Information System:
3056 Engines Piston and Rings
980G Wheel Loader Braking System Limit Switch (Transmission Neutralizer)
824G , 825G and 826G Landfill Compactor Maintenance Interval Schedule
992G Wheel Loader and 854G Wheel Dozer Steering System Relief Valve (Steering Pilot)
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Carryback Weight Entering
D9R Track-Type Tractor Lifting and Tying Down the Machine
Installing New Components for a Kickout and Positioner on a Track Loader{5109, 5112, 5132} Installing New Components for a Kickout and Positioner on a Track Loader{5109, 5112, 5132}
C-9 Engines for Caterpillar Built Machines Water Pump - Test
992G Wheel Loader and 854G Wheel Dozer Steering System Pressure Switch (Filter Bypass)
C-9 Engines for Caterpillar Built Machines Cooling System - Test
902 and 906 Compact Wheel Loaders Machine Systems Window Wiper Motor (Rear) - Remove
515 Wheel Skidder and 525 Wheel Skidder Hydraulic and Steering System Control Valve (Hydraulic Retrieval Device)
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Calibration Weight Entering
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Weigh Range Adjusting
3056 Engines Engine Oil Cooler
3054 and 3056 Industrial and Generator Set Engines Front Housing and Covers
3056 Engines Engine Oil Pressure Sensor
3056 Engines Coolant Temperature Sensor
3056 Engines Engine Oil Filter Base
631E Series II, 633E Series II and 637E Series II Wheel Tractor Power Train Transmission Hydraulic Control Pilot Pressure - Test and Adjust
C9 Engines for Caterpillar Built Machines Speed/Timing Sensor - Remove and Install
3056 Engines Air Inlet Heater
924G and 924Gz Wheel Loaders Power Train Bevel Gear and Pinion (Fixed and Oscillating Axles)
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders Electrical Power Supply