992G Wheel Loader and 854G Wheel Dozer Steering System Caterpillar


Relief Valve (Steering Pilot)

Usage:

854G 1JW



Illustration 1g00635819

Pressure setting for the relief valve ... 2400 ± 150 kPa (350 ± 22 psi)

Rate of flow for the relief valve ... 35 L/min (9.2 US gpm)

Oil temperature for the relief valve test ... 49 °C (120 °F)

(1) Torque for the relief valve ... 50 ± 5 N·m (37 ± 4 lb ft)

(2) Torque for the locknut ... 10 N·m (90 lb in)

Caterpillar Information System:

992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Carryback Weight Entering
D9R Track-Type Tractor Lifting and Tying Down the Machine
Installing New Components for a Kickout and Positioner on a Track Loader{5109, 5112, 5132} Installing New Components for a Kickout and Positioner on a Track Loader{5109, 5112, 5132}
C-9 Engines for Caterpillar Built Machines Water Pump - Test
992G Wheel Loader and 854G Wheel Dozer Steering System Pressure Switch (Filter Bypass)
C-9 Engines for Caterpillar Built Machines Cooling System - Test
902 and 906 Compact Wheel Loaders Machine Systems Window Wiper Motor (Rear) - Remove
515 Wheel Skidder and 525 Wheel Skidder Hydraulic and Steering System Control Valve (Hydraulic Retrieval Device)
C-9 Engines for Caterpillar Built Machines Cooling System - Check - Overheating
631E Series II, 633E Series II and 637E Series II Wheel Tractor Power Train Torque Converter Outlet Relief Valve Pressure - Test
992G Wheel Loader and 854G Wheel Dozer Braking System Oil Filter (Case Drain)
3056 Engine for Caterpillar Built Machines Crankshaft - Install
824G , 825G and 826G Landfill Compactor Maintenance Interval Schedule
980G Wheel Loader Braking System Limit Switch (Transmission Neutralizer)
3056 Engines Piston and Rings
924G and 924GZ Wheel Loaders Hydraulic System Ride Control Accumulator
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Calibration Weight Entering
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Weigh Range Adjusting
3056 Engines Engine Oil Cooler
3054 and 3056 Industrial and Generator Set Engines Front Housing and Covers
3056 Engines Engine Oil Pressure Sensor
3056 Engines Coolant Temperature Sensor
3056 Engines Engine Oil Filter Base
631E Series II, 633E Series II and 637E Series II Wheel Tractor Power Train Transmission Hydraulic Control Pilot Pressure - Test and Adjust
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.