3056 Engines Caterpillar


Engine Oil Cooler

Usage:

3056 8XJ



图 1g00635880

(1) 发动机机油冷却器芯

(2) 按以下扭矩拧紧将发动机机油冷却器芯固定至盖的螺母。 ... 22 N·m (16 lb ft)

注: 发动机机油冷却器芯上的挡板必须朝向发动机前端。

(3) O 形密封圈

将新的 O 形密封圈安装在发动机机油冷却器芯的法兰上。

(4) 双头螺柱

4C-4030 螺纹固定剂 涂敷在缸体双头螺柱的前三道螺纹上。

(5) 盖

安装前,将 3S-6252 密封胶 涂敷在盖 (5) 与缸体的配合面上。

(6) 按以下扭矩拧紧将机油冷却器盖固定至缸体的螺母。 ... 22 N·m (16 lb ft)

(7) 按以下扭矩拧紧将机油冷却器管路固定至盖的螺栓。 ... 22 N·m (16 lb ft)

(8) 按以下扭矩拧紧将机油冷却器盖固定至缸体的螺栓。 ... 22 N·m (16 lb ft)

(9) 按以下扭矩拧紧将机油冷却器管路固定至发动机机油冷却器的螺栓。 ... 22 N·m (16 lb ft)

Caterpillar Information System:

992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Weigh Range Adjusting
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Calibration Weight Entering
924G and 924GZ Wheel Loaders Hydraulic System Ride Control Accumulator
3056 Engines Piston and Rings
980G Wheel Loader Braking System Limit Switch (Transmission Neutralizer)
824G , 825G and 826G Landfill Compactor Maintenance Interval Schedule
992G Wheel Loader and 854G Wheel Dozer Steering System Relief Valve (Steering Pilot)
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Carryback Weight Entering
D9R Track-Type Tractor Lifting and Tying Down the Machine
Installing New Components for a Kickout and Positioner on a Track Loader{5109, 5112, 5132} Installing New Components for a Kickout and Positioner on a Track Loader{5109, 5112, 5132}
C-9 Engines for Caterpillar Built Machines Water Pump - Test
992G Wheel Loader and 854G Wheel Dozer Steering System Pressure Switch (Filter Bypass)
3054 and 3056 Industrial and Generator Set Engines Front Housing and Covers
3056 Engines Engine Oil Pressure Sensor
3056 Engines Coolant Temperature Sensor
3056 Engines Engine Oil Filter Base
631E Series II, 633E Series II and 637E Series II Wheel Tractor Power Train Transmission Hydraulic Control Pilot Pressure - Test and Adjust
C9 Engines for Caterpillar Built Machines Speed/Timing Sensor - Remove and Install
3056 Engines Air Inlet Heater
924G and 924Gz Wheel Loaders Power Train Bevel Gear and Pinion (Fixed and Oscillating Axles)
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders Electrical Power Supply
992G Wheel Loader and 854G Wheel Dozer Steering System Pilot Valve (STIC Steering)
943 Track-Type Loader Hydrostatic Power Control Unit Incorrect Transmission Control Lever Response - Check
943 Track-Type Loader Hydrostatic Power Control Unit Lack of Power - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.