Water Pump - Install - 3013, 3014, and 3024 Engines
Installation Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove all debris and gasket material from the mating surfaces of the water pump and the cylinder head.
- Put gasket (7) in position on the engine.
Show/hide table
 | |
| Illustration 1 | g00595454 |
- Put water pump (5) in position on the engine and install bolts (4) and nut (6). Tighten bolts (4) and nut (6) that fastens the water pump on the engine.
Show/hide table
 | |
| Illustration 2 | g00595187 |
- Put the alternator bracket in position and install bolt (3) on the water pump.
Show/hide table
 | |
| Illustration 3 | g00595156 |
- Install hose (2) and hose (1) on the water pump and tighten the hose clamps.
- Fill the cooling system with coolant to the correct level. Refer to the Operation and Maintenance Manual, "Refill Capacities" topic for more information.
End By: Install the pulley and the fan on the water pump. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Caterpillar Information System:
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Bucket Volume Entering
924G and 924Gz Wheel Loaders Power Train Axle Housing and Bearing Preload - Adjust
988G Wheel Loader Machine Systems Blower Motor (Air Conditioner, Heater) - Remove
SR4 and SR4B Electric Power Generation Rewind Data Generator Identification
924G and 924Gz Wheel Loaders Power Train Differential Pinion Preload - Adjust
631E Series II, 633E Series II and 637E Series II Wheel Tractor Power Train Transmission Lubrication Relief Valve Pressure - Test
D10R, D11R and D11R Carrydozer Track-Type Tractors Implement Electronic Control System Implement Electronic Control (Ripper)
824G , 825G and 826G Landfill Compactor Brake Discs - Check
3056 Engine for Caterpillar Built Machines Connecting Rod Bearings - Remove
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Check Valve (Ride Control)
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Machine Status Delay
C-9 Engines for Caterpillar Built Machines Engine Oil Pressure - Test
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Water Pump - Remove - 3013, 3014, and 3024 Engines
3056 Engine for Caterpillar Built Machines Connecting Rod Bearings - Install
924G and 924Gz Wheel Loaders Power Train Limited Slip Differential Disc End Play Check - Check
924G and 924Gz Wheel Loaders Power Train NoSPIN Differential - Test
3056 Engine for Caterpillar Built Machines Crankshaft - Remove
C-9 Engines for Caterpillar Built Machines Excessive Engine Oil Consumption - Inspect
924G and 924Gz Wheel Loaders Power Train Transmission Pressures - Test and Adjust
3056 Engine for Caterpillar Built Machines Crankshaft - Install
992G Wheel Loader and 854G Wheel Dozer Braking System Oil Filter (Case Drain)
631E Series II, 633E Series II and 637E Series II Wheel Tractor Power Train Torque Converter Outlet Relief Valve Pressure - Test
C-9 Engines for Caterpillar Built Machines Cooling System - Check - Overheating
515 Wheel Skidder and 525 Wheel Skidder Hydraulic and Steering System Control Valve (Hydraulic Retrieval Device)