Engine Oil Filter Base and Oil Cooler - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 185-3630     | Strap Wrench Assembly     | 1     |
- Drain the coolant system. Refer to Operation and Maintenance Manual, "Refill Capacities and Recommendations".
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove nuts (1) . Remove bracket (2) and the hose assembly. Use Tooling (A) and remove oil filter (3) .
Show/hide table
Illustration 1 | g01261004 |
- Remove bolts (4) . Remove engine oil filter base (5) and the gasket.
Show/hide table
Illustration 2 | g01261010 |
- Remove oil cooler (6) and the gasket. Remove O-ring seals (7) .
Show/hide table
Illustration 3 | g01261014 |
Caterpillar Information System:
3500B High Displacement Generator Set Engines Alternator and Fan Belts - Inspect/Adjust/Replace
C27 and C32 Engines Water Pump - Test
3500 and 3500B Engines Refill Capacities and Recommendations
Installation of 244-1090 Alarm Gp {7400, 7402, 7407} Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
3126B Petroleum Engine Cooling System
3126B Petroleum Engine Sensors and Electrical Connectors
C27 and C32 Engines Rear Gear Group - Time
3508B, 3512B and 3516B Generator Set Engines Crankshaft - Install
3508B, 3512B and 3516B Generator Set Engines Crankshaft - Remove
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel System Secondary Filter - Replace
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel System - Prime
3508B, 3512B and 3516B Generator Set Engines Engine Oil Pan - Install
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Relief Valve (Swing)
2004/12/01 New Ignition Transformers are Used {1561}
C27 and C32 Engines Fuel System Pressure - Test
3500B and 3500 Marine Propulsion Engines with EUI Option Product Lifting
3500B and 3500 Marine Propulsion Engines with EUI Option Product Storage
3500B and 3500 Marine Propulsion Engines with EUI Option Refill Capacities and Recommendations
3500B and 3500 Marine Propulsion Engines with EUI Option Belts - Inspect/Adjust/Replace
C7 On-Highway Engine Water Pump - Remove
C7 Engines for Caterpillar Built Machines Water Pump - Disassemble
C7 Engines for Caterpillar Built Machines Water Pump - Assemble
C7 On-Highway Engine Water Pump - Install
3508C, 3512C and 3516C Marine Engines Pistons and Connecting Rods - Remove