Water Pump - Assemble
组装步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 1P-0510 | 冲头总成 | 1 |
| B | 5P-9722 | 油封起子 | 1 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (A) 和适当的压具将皮带轮 (9) 安装在轴组件 (8) 上。
Show/hide table
 | |
| 图 1 | g01124833 |
- 使用工具 (B) 和适当的压具将油封组件 (6) 安装在壳体 (7) 中。
- 使用工具 (A) 和适当的压具将轴组件 (8) 安装在壳体 (7) 中。 安装轴组件，使轴承与壳体平齐。
- 使用工具 (A) 和适当的压具将叶轮 (5) 安装在轴组件 (8) 上。 安装叶轮，直到叶轮与水泵机加工表面之间的距离为 0.75 ± 0.25 mm (0.030 ± 0.010 in)。
- 安装新密封垫 (4) 。
- 安置盖 (3) 并安装螺栓 (2) 。 安装新 O 形密封圈 (1) 。
End By: 安装水泵。 请参阅 拆解和组装, "水泵 - 安装"。
Caterpillar Information System:
C7 Engines for Caterpillar Built Machines Water Pump - Disassemble
C7 On-Highway Engine Water Pump - Remove
3500B and 3500 Marine Propulsion Engines with EUI Option Belts - Inspect/Adjust/Replace
3500B and 3500 Marine Propulsion Engines with EUI Option Refill Capacities and Recommendations
3500B and 3500 Marine Propulsion Engines with EUI Option Product Storage
3500B and 3500 Marine Propulsion Engines with EUI Option Product Lifting
C27 and C32 Engines Fuel System Pressure - Test
2004/12/01 New Ignition Transformers are Used {1561}
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Relief Valve (Swing)
C7 On-Highway Engine Engine Oil Filter Base and Oil Cooler - Remove
3500B High Displacement Generator Set Engines Alternator and Fan Belts - Inspect/Adjust/Replace
C27 and C32 Engines Water Pump - Test
C7 On-Highway Engine Water Pump - Install
3508C, 3512C and 3516C Marine Engines Pistons and Connecting Rods - Remove
3508C, 3512C and 3516C Marine Engines Pistons and Connecting Rods - Install
345C, 365C and 385C Excavators Air Conditioning and Heating Air Conditioner Lines
3500 Engines Connecting Rod Bearings - Remove and Install
854G Wheel Dozer High Intensity Discharge Lamp (HID) - Replace - If Equipped
3508C, 3512C and 3516C Marine Engines Crankshaft Main Bearings - Install
3508C, 3512C and 3516C Marine Engines Crankshaft Main Bearings - Remove
C32 Marine Engines Sensors and Electrical Connectors
345 MHPUC Mobile Hydraulic Power Unit Machine System Specifications Relief Valve (Main) - Heavy Lift
2004/12/01 A Different Starting Motor is Used {1451}
345C Excavator Machine System Specifications Relief Valve (Main)