Changing Direction and Gear
Gear changes and directional changes at full engine speed are possible. However, deceleration and/or braking is recommended when you change direction. This will maximize operator comfort and the service life of transmission components.
- Push the decelerator pedal downward in order to decrease the engine speed.
- Push the brake pedal downward in order to stop the machine.
Show/hide table
 | |
| Illustration 1 | g00038619 |
- Move the transmission control lever to NEUTRAL. Move the lever to the desired direction.
Show/hide table
 | |
| Illustration 2 | g00529006 |
- Move the lever for the transmission control to the desired gear.
- Release the brake pedal.
- Increase the engine speed by releasing the decelerator pedal.
Caterpillar Information System:
963B Track-Type Loader Hydraulic System Lift and Tilt Pilot Control Valve
963B Track-Type Loader Walk-Around Inspection
G3500B Engines Starting the Engine
963B Track-Type Loader Hydraulic System Hydraulic Tank and Filter
D9R Track-Type Tractor Machine Operation Information
623F Wheel Tractor-Scraper Machine Systems Brake Actuator - Assemble
623F Wheel Tractor-Scraper Machine Systems Brake Actuator - Disassemble
623F Wheel Tractor-Scraper Machine Systems Load Cylinder - Install
623F Wheel Tractor-Scraper Machine Systems Load Cylinder - Remove
623F Wheel Tractor-Scraper Machine Systems Steering Control Valve - Assemble
623F Wheel Tractor-Scraper Machine Systems Steering Control Valve - Disassemble
623F Wheel Tractor-Scraper Machine Systems Hitch - Install
980G Wheel Loader Power Train Differential and Bevel Gear - Install
D9R Track-Type Tractor Normal Steering
515 Wheel Skidder and 525 Wheel Skidder Cooling System Water Temperature Regulator - Replace
3046 Engine For Caterpillar Built Machines Crankshaft Front Seal - Remove
515 Wheel Skidder and 525 Wheel Skidder Engine Air Filter Primary Element - Clean/Replace
515 Wheel Skidder and 525 Wheel Skidder Engine Air Filter Secondary Element - Replace
3046 Engine For Caterpillar Built Machines Crankshaft Front Seal - Install
631E Series II and 637E Series II Wheel Tractor-Scrapers Auger Hydraulic System Auger Charging System - Test and Adjust
994D Wheel Loader Sound Information and Vibration Information
994D Air System Wheel Loader Air Compressor
D9R Track-Type Tractor Power Train Track - Disassemble
D9R Track-Type Tractor Power Train Track - Assemble