Crankshaft Front Seal - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 4C-6376     | Seal Installer Stud     | 1     |
4C-6377 | Seal Installer Washer     | 1     | |
4C-6378 | Seal Installer Sleeve     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Clean the faces of all the mating parts. Apply a thin coat of clean engine oil to a new crankshaft front seal.
Show/hide table
Illustration 1 | g00529163 |
- Install new crankshaft front seal (1) with Tool (A) .
- Remove Tool (A) and check crankshaft front seal (1) for correct installation.
- Apply clean engine oil to the face of the crankshaft pulley that will be in contact with the new crankshaft front seal.
End By: Install the vibration damper and the pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install".
Caterpillar Information System:
515 Wheel Skidder and 525 Wheel Skidder Engine Air Filter Secondary Element - Replace
515 Wheel Skidder and 525 Wheel Skidder Engine Air Filter Primary Element - Clean/Replace
3046 Engine For Caterpillar Built Machines Crankshaft Front Seal - Remove
515 Wheel Skidder and 525 Wheel Skidder Cooling System Water Temperature Regulator - Replace
D9R Track-Type Tractor Normal Steering
980G Wheel Loader Power Train Differential and Bevel Gear - Install
D9R Track-Type Tractor Changing Direction and Gear
963B Track-Type Loader Hydraulic System Lift and Tilt Pilot Control Valve
963B Track-Type Loader Walk-Around Inspection
G3500B Engines Starting the Engine
963B Track-Type Loader Hydraulic System Hydraulic Tank and Filter
D9R Track-Type Tractor Machine Operation Information
631E Series II and 637E Series II Wheel Tractor-Scrapers Auger Hydraulic System Auger Charging System - Test and Adjust
994D Wheel Loader Sound Information and Vibration Information
994D Air System Wheel Loader Air Compressor
D9R Track-Type Tractor Power Train Track - Disassemble
D9R Track-Type Tractor Power Train Track - Assemble
D9R Track-Type Tractor Power Train Sprocket Segment - Remove and Install
980G Wheel Loader Machine Systems Pilot Valve (Steering) - Remove
611 Wheel Tractor-Scraper Differential and Final Drive Breather - Clean
980G Wheel Loader Machine Systems Pilot Valve (Steering) - Install
D9R Track-Type Tractor Power Train Track Roller - Remove
D9R Track-Type Tractor Power Train Track Roller - Disassemble
D9R Track-Type Tractor Power Train Track Roller - Assemble