3046 Engine For Caterpillar Built Machines Caterpillar

Removal Procedure

Show/hide table

NOTICE
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life.

Show/hide table

NOTICE
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose of all fluids according to local regulations and mandates.

Show/hide table



Illustration 1	g00520656

1. Disconnect hose (3) from the fuel transfer pump.

2. Remove three nuts (2) and washers from the fuel transfer pump.

3. Remove fuel transfer pump (1) .

Show/hide table



Illustration 2	g00520702

4. Check the condition of O-ring seal (4). Replace the O-ring seal, if necessary.