D11R Track-Type Tractor Power Train Caterpillar


Track Idler

Usage:

D11R 7PZ
The machine has a front idler and a rear idler for each roller frame. The idler components are similar to the track rollers.

The idler shaft (3) has an oil reservoir that gives lubrication for the bearing surfaces.




Illustration 1g00658702

Track Idler

(1) Rubber stopper and plug

(2) Retainer

(3) Idler shaft

(4) Idler

(5) Seal

(6) Collar

Caterpillar Information System:

D11R Track-Type Tractor Power Train Equalizer Bar
3046 Engine For Caterpillar Built Machines Fuel Injection Pump Housing and Governor - Install
D11R Track-Type Tractor Power Train Track Roller Frame
D11R Track-Type Tractor Power Train Undercarriage
515 Wheel Skidder and 525 Wheel Skidder Transmission and Grapple Electronic Control System Electrical General Information
994D Wheel Loader Steering System Articulated Hitch Group - Adjust
D11R Track-Type Tractor Power Train Final Drive
D11R Track-Type Tractor Power Train Steering and Brake Control Valve
D9R Track-Type Tractor Fire Prevention and Explosion Prevention
D11R Track-Type Tractor Power Train Steering Clutch and Brake
D11R Track-Type Tractor Power Train Transfer and Bevel Gears
994D Wheel Loader Machine System Loader Frame to Rear Frame - Connect
3176C and 3196 Engines For Caterpillar Built Machines Electronic Control Module - Remove and Install
D11R Track-Type Tractor Power Train Tracks
611 Wheel Tractor-Scraper Transmission Oil - Change
D11R Track-Type Tractor Power Train Pivot Shaft
D11R Track-Type Tractor Power Train Track Roller
994D Wheel Loader Machine System Piston Pump (Implement) - Remove
611 Wheel Tractor-Scraper Transmission Breather - Clean
3114, 3116 and 3126 MUI Engine Governors Governor Limiting Circuit (Types I, II, III, and IV)
963B Track-Type Loader Electronic Monitoring System (EMS)
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Basic Operation
3046 Engine For Caterpillar Built Machines Fuel Transfer Pump - Remove
988F and 988F Series II Wheel Loaders Power Train Trunnion Support (Oscillating Axle, Front) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.