611 Wheel Tractor-Scraper Caterpillar


Transmission Breather - Clean

Usage:

611 6SZ


Illustration 1g00520608

The transmission breather for the tractor is located on the top of the transmission and at the right rear of the tractor.

Use the following procedure to clean the breather.

  1. Clean the area around the breather.

  2. Remove the breather.

  3. Wash the breather in clean, nonflammable solvent.

  4. Allow the breather to dry.

  5. Install the breather.

Caterpillar Information System:

994D Wheel Loader Machine System Piston Pump (Implement) - Remove
D11R Track-Type Tractor Power Train Track Roller
D11R Track-Type Tractor Power Train Pivot Shaft
611 Wheel Tractor-Scraper Transmission Oil - Change
D11R Track-Type Tractor Power Train Tracks
3176C and 3196 Engines For Caterpillar Built Machines Electronic Control Module - Remove and Install
D11R Track-Type Tractor Power Train Track Idler
D11R Track-Type Tractor Power Train Equalizer Bar
3046 Engine For Caterpillar Built Machines Fuel Injection Pump Housing and Governor - Install
D11R Track-Type Tractor Power Train Track Roller Frame
D11R Track-Type Tractor Power Train Undercarriage
515 Wheel Skidder and 525 Wheel Skidder Transmission and Grapple Electronic Control System Electrical General Information
3114, 3116 and 3126 MUI Engine Governors Governor Limiting Circuit (Types I, II, III, and IV)
963B Track-Type Loader Electronic Monitoring System (EMS)
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Basic Operation
3046 Engine For Caterpillar Built Machines Fuel Transfer Pump - Remove
988F and 988F Series II Wheel Loaders Power Train Trunnion Support (Oscillating Axle, Front) - Remove and Install
824G , 825G and 826G Landfill Compactor Fuel Tank Cap and Strainer - Clean
3114, 3116 and 3126 MUI Engine Governors Governor Limiting Circuit (Types V, VI, and VII)
615C Series II Wheel Tractor-Scraper Tire Inflation - Check
611 Wheel Tractor-Scraper Seat Suspension - Lubricate
988F and 988F Series II Wheel Loaders Power Train Trunnion Support (Oscillating Axle, Rear) - Remove and Install
3176C and 3196 Industrial Engines Fuel Filter Base - Remove and Install
3046 Engine For Caterpillar Built Machines Fuel Transfer Pump - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.