Turbocharger - Remove
Removal Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose of all fluids according to local regulations and mandates. |
- Loosen the hose clamps on hose (1) and remove hose (1) .
Show/hide table
 | |
| Illustration 1 | g00520818 |
- Remove clamp (3) that secures pipe (2) to pipe (4) .
- Disconnect pipe (2) and remove pipe (2) .
- Loosen clamp (6) that secures pipe (4) into hose (5) .
- Remove nuts (8) from studs on exhaust manifold elbow (9) .
Show/hide table
 | |
| Illustration 2 | g00520820 |
- Remove turbocharger (7) from exhaust manifold elbow (9) .
- Remove bolts (10) from turbocharger (7) .
Show/hide table
 | |
| Illustration 3 | g00520821 |
- Remove pipe (4) and remove the pipe's gasket (not shown) from turbocharger (7) .
- Remove gasket (11) from exhaust manifold elbow (9) .
Show/hide table
 | |
| Illustration 4 | g00520822 |
Caterpillar Information System:
973 Track-Type Loader Hydrostatic Transmission Oil Filter - Replace
3046 Engine For Caterpillar Built Machines Fuel Transfer Pump - Install
3176C and 3196 Industrial Engines Fuel Filter Base - Remove and Install
988F and 988F Series II Wheel Loaders Power Train Trunnion Support (Oscillating Axle, Rear) - Remove and Install
611 Wheel Tractor-Scraper Seat Suspension - Lubricate
615C Series II Wheel Tractor-Scraper Tire Inflation - Check
3114, 3116 and 3126 MUI Engine Governors Governor Limiting Circuit (Types V, VI, and VII)
824G , 825G and 826G Landfill Compactor Fuel Tank Cap and Strainer - Clean
988F and 988F Series II Wheel Loaders Power Train Trunnion Support (Oscillating Axle, Front) - Remove and Install
3046 Engine For Caterpillar Built Machines Fuel Transfer Pump - Remove
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Basic Operation
963B Track-Type Loader Electronic Monitoring System (EMS)
D9R Track-Type Tractor Power Train Track Roller Frame
623F Wheel Tractor-Scraper 3406C Engine Supplement Engine - Remove
623F Wheel Tractor-Scraper 3406C Engine Supplement Engine - Install
623F Wheel Tractor-Scraper 3406C Engine Supplement Engine Rear Support - Remove
623F Wheel Tractor-Scraper 3406C Engine Supplement Engine Rear Support - Install
623F Wheel Tractor-Scraper 3406C Engine Supplement Radiator - Remove
623F Wheel Tractor-Scraper 3406C Engine Supplement Radiator - Install
623F Wheel Tractor-Scraper 3406C Engine Supplement Radiator Guard - Remove
623F Wheel Tractor-Scraper 3406C Engine Supplement Radiator Guard - Install
623F Wheel Tractor-Scraper 3406C Engine Supplement Radiator - Disassemble
623F Wheel Tractor-Scraper 3406C Engine Supplement Radiator - Assemble
623F Wheel Tractor-Scraper Machine Systems Main Control Valve - Remove