Bulldozer Angle Cylinder - Install
Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Use the lifting device in order to put the angle cylinder into position on the machine.
Show/hide table
Illustration 1 | g00727669 |
- Install pins (4) and the retainers.
- Install hydraulic hose assemblies (3) on the angle cylinder.
Show/hide table
Illustration 2 | g00727668 |
- Install guard assembly (2) and bolts (1) .
Show/hide table
Illustration 3 | g00727667 |
- Fill the hydraulic oil tank with oil to the proper level. Refer to the appropriate Operation and Maintenance Manual for the correct procedure.
Caterpillar Information System:
D6M Track-Type Tractor Machine Systems Bulldozer - Remove
D6M Track-Type Tractor Machine Systems Bulldozer - Install
D6M Track-Type Tractor Machine Systems Bulldozer - Disassemble
D6M Track-Type Tractor Machine Systems Bulldozer - Assemble
D6M Track-Type Tractor Machine Systems Bulldozer (VPAT) - Remove
D6M Track-Type Tractor Machine Systems Bulldozer (VPAT) - Install
545 Wheel Skidder Fuel System Secondary Filter - Replace
D6M Track-Type Tractor Machine Systems Battery - Remove and Install
D6M Track-Type Tractor Machine Systems Air Conditioner and Heater Fan Motor - Remove and Install
D6M Track-Type Tractor Machine Systems Air Conditioner Dryer - Remove and Install
515 Wheel Skidder and 525 Wheel Skidder Steering Control
637E Series II Wheel Tractor-Scrapers Cushion-Hitch Control
D6M Track-Type Tractor Machine Systems Bulldozer Angle Cylinder - Remove
D6M Track-Type Tractor Machine Systems Bulldozer C-Frame - Remove and Install
D6M Track-Type Tractor Machine Systems Bulldozer Control Valve - Assemble
D6M Track-Type Tractor Machine Systems Bulldozer Control Valve - Disassemble
D6M Track-Type Tractor Machine Systems Bulldozer Control Valve - Install
D6M Track-Type Tractor Machine Systems Bulldozer Control Valve - Remove
D6M Track-Type Tractor Machine Systems Bulldozer Lift Cylinder - Install
D6M Track-Type Tractor Machine Systems Bulldozer Lift Cylinder - Remove
D6M Track-Type Tractor Machine Systems Bulldozer Lift Cylinder Mounts - Remove and Install
D6M Track-Type Tractor Machine Systems Bulldozer Tilt Cylinder - Install
D6M Track-Type Tractor Machine Systems Bulldozer Tilt Cylinder - Remove
D8R Track-Type Tractor Battery - Inspect