Bulldozer - Disassemble
Disassembly Procedure
Start By:
- Remove the bulldozer. Refer to Disassembly and Assembly, "Bulldozer - Remove" for the machine that is being serviced.
- Raise the bulldozer and put blocks (2) into position under push arms (1), as shown.
Show/hide table
Illustration 1 | g00727282 |
- Disconnect tilt cylinder hose assemblies (3) .
Show/hide table
Illustration 2 | g00727285 |
- Remove guard (4) and the rubber from the hose assemblies.
- Fasten a hoist to the tilt cylinder. Remove the bolts, cap (5) and the shims from the end of the tilt cylinder.
Show/hide table
Illustration 3 | g00727286 |
- Remove pin (7) and tilt cylinder (6) from the bulldozer. The weight of the tilt cylinder is 75 kg (165.0 lb).
- Fasten a hoist to the rod end of the lift cylinder.
Show/hide table
Illustration 4 | g00727287 |
- Remove the bolts, cap (8) and the shims from rod assembly (9) .
- Retract the lift cylinders and remove the hoist.
- Remove pins (11) and link assembly (10) from the push arm and the bulldozer blade.
Show/hide table
Illustration 5 | g00727291 |
- Fasten a hoist to bulldozer blade (12) .
Show/hide table
Illustration 6 | g00727294 |
- Fasten a hoist to brace (14) .
Show/hide table
Illustration 7 | g00727295 |
- Remove the bolts, cap (13) and the shims from brace (14) .
- Remove pin (15) and brace (14) from the bulldozer. The weight of the brace is 30 kg (65.0 lb).
- Remove the bolts, caps (16) and the shims from the push arms and blade (12) .
Show/hide table
Illustration 8 | g00727297 |
- Remove blade (12). The weight of the blade is 864 kg (1900.0 lb).
- Fasten a hoist and Tooling (A) to left push arm (17), as shown.
Show/hide table
Illustration 9 | g00727298 |
Show/hide table
Illustration 10 | g00727300 |
- Remove the bolts and cap (18) from the left push arm and the trunnion.
- Remove left push arm (17) from the trunnion and the right push arm. The weight of the left push arm is 386 kg (850.0 lb).
- Fasten a hoist and Tooling (A) to right push arm (20), as shown.
Show/hide table
Illustration 11 | g00727302 |
- Remove the bolts and cap (19) from the right push arm and the trunnion.
- Remove right push arm (20) from the trunnion and blocks (2). The weight of the right push arm is 386 kg (850.0 lb).
- Remove six bolts (22), two retainers (23) and cage (21) from right push arm (20) .
Show/hide table
Illustration 12 | g00727335 |
- Remove snap ring (25) and bearing (24) from cage (21) .
Show/hide table
Illustration 13 | g00727306 |
Caterpillar Information System:
D6M Track-Type Tractor Machine Systems Bulldozer - Assemble
D6M Track-Type Tractor Machine Systems Bulldozer (VPAT) - Remove
D6M Track-Type Tractor Machine Systems Bulldozer (VPAT) - Install
545 Wheel Skidder Fuel System Secondary Filter - Replace
D6M Track-Type Tractor Machine Systems Battery - Remove and Install
D6M Track-Type Tractor Machine Systems Air Conditioner and Heater Fan Motor - Remove and Install
D6M Track-Type Tractor Machine Systems Air Conditioner Dryer - Remove and Install
515 Wheel Skidder and 525 Wheel Skidder Steering Control
637E Series II Wheel Tractor-Scrapers Cushion-Hitch Control
515 Wheel Skidder and 525 Wheel Skidder Window Wiper and Washer Control
623F Wheel Tractor-Scraper Power Train Transmission Electronic Control System
D6R Track-Type Tractor Power Train Brake Control Valve
D6M Track-Type Tractor Machine Systems Bulldozer - Install
D6M Track-Type Tractor Machine Systems Bulldozer - Remove
D6M Track-Type Tractor Machine Systems Bulldozer Angle Cylinder - Install
D6M Track-Type Tractor Machine Systems Bulldozer Angle Cylinder - Remove
D6M Track-Type Tractor Machine Systems Bulldozer C-Frame - Remove and Install
D6M Track-Type Tractor Machine Systems Bulldozer Control Valve - Assemble
D6M Track-Type Tractor Machine Systems Bulldozer Control Valve - Disassemble
D6M Track-Type Tractor Machine Systems Bulldozer Control Valve - Install
D6M Track-Type Tractor Machine Systems Bulldozer Control Valve - Remove
D6M Track-Type Tractor Machine Systems Bulldozer Lift Cylinder - Install
D6M Track-Type Tractor Machine Systems Bulldozer Lift Cylinder - Remove
D6M Track-Type Tractor Machine Systems Bulldozer Lift Cylinder Mounts - Remove and Install