Vane Motor (Elevator) - Assemble
Assembly Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1P-0510     | Driver Group     | 1     |
B     | 1P-1859     | Retaining Ring Pliers     | 1     |
C     | 1U-6684     | Compressor     | 1     |
- Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
- Install seal (27) , O-ring seal (26) and O-ring seal (25) to body (4) .
Show/hide table
Illustration 1 | g00423757 |
- Lubricate lip seal (24) lightly with the lubricant that is being sealed. Use Tool (A) to install lip seal (24) to body (4) .
Show/hide table
Illustration 2 | g00423756 |
- Install washer (23) to body (4) .
Show/hide table
Illustration 3 | g00423751 |
- Use a hydraulic press to install roller bearing (22) to shaft assembly (21) . Install the roller bearing until the roller bearing contacts the lip of the shaft.
Show/hide table
Illustration 4 | g00423781 |
- Use a hydraulic press to install shaft assembly (21) to body (4) . Install the shaft assembly until the shaft assembly is seated in the body.
Show/hide table
Illustration 5 | g00423780 |
- Use Tool (B) to install retaining ring (20) to shaft assembly (21) .
Show/hide table
Illustration 6 | g00423749 |
- Install O-ring seal (19) and seal (18) to ring (17) .
Show/hide table
Illustration 7 | g00423748 |
- Install ring (17) to body (4) .
Show/hide table
Illustration 8 | g00423747 |
- Install O-ring seal (16) to plate assembly (14) .
Show/hide table
Illustration 9 | g00423746 |
- Use Tool (C) to install rotor assembly (15) to ring (12) .
Show/hide table
Illustration 10 | g00451288 |
- Install dowel pins (13) , ring (12) , plate assembly (11) and two bolts (10) to plate assembly (14) .
Show/hide table
Illustration 11 | g00423744 |
- Install cartridge (9) and seal (8) to body (4) .
Show/hide table
Illustration 12 | g00423742 |
- Install O-ring seal (7) to cover (2) . Install swivel adapter (6) to cover (2) and tighten retaining nut (5) .
Show/hide table
Illustration 13 | g00423741 |
- Install cover (2) and four bolts (3) to body (4) . Install plug (1) to cover (2) .
Show/hide table
Illustration 14 | g00423739 |
End By: Install the elevator motor. Refer to Disassembly and Assembly, "Vane Motor (Elevator) - Install". The information is in this manual.
Caterpillar Information System:
994D Wheel Loader Power Train Rollover Protective Structure (ROPS)
992G Wheel Loader and 854G Wheel Dozer Steering System Steering Neutralizer Valve - Check and Adjust
966G Wheel Loader and 972G Wheel Loader Power Train Output Transfer Gears
992G Wheel Loader Machine Systems Ride Control Valve - Remove
613C Series II Wheel Tractor-Scraper Machine Systems Vane Motor (Elevator) - Disassemble
D6G Track-Type Tractor Power Train Final Drive Gear, Idler Pinion and Bearings - Remove
992G Wheel Loader Machine Systems Ride Control Valve - Disassemble
3306B Industrial Engine Air Tank Moisture and Sediment - Drain - If Equipped
D6G Track-Type Tractor Power Train Final Drive Case - Remove and Install
966G Wheel Loader and 972G Wheel Loader Power Train Transmission Planetary
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Steering Neutralizer Valve - Check and Adjust
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Pilot Valve (Steering) Supply Pressure - Test and Adjust
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Leakage - Test
902 and 906 Compact Wheel Loaders Hydraulic System Lift Cylinder
Repair of Boom and Bucket Stop Alignment{6107, 6501} Repair of Boom and Bucket Stop Alignment{6107, 6501}
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Disassemble
615C Series II Wheel Tractor-Scraper Machine Systems Pilot Control Valve (Elevator) - Assemble
994D Wheel Loader Power Train Rim Mounting
992G Wheel Loader Machine Systems Ride Control Valve - Install
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Remove
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Install
994D Wheel Loader Power Train Torque Converter System Specifications
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Assemble
994D Wheel Loader Power Train Temperature Sensor (Torque Converter Outlet Oil)