Steering Neutralizer Valve - Check and Adjust
Show/hide table
 | |
| 图 1 | g01057442 |
空档器阀位于发动机端机架上时机器的顶部视图。 | |
Show/hide table
| 图 2 | g00103613 |
(1) 左转向止点 (2) 塞子 | |
- 把机器移到干燥、水平和无碎屑的表面。
- 将 25.4 mm (1 in) 的塞子 (2) 球置于左转向止点 (1) 的后表面。
- 将变速箱置于空档，并起动发动机。 将一个空铲斗升至约 30 cm (12 in) 的高度。 松开停车制动器。
- 以高怠速运转发动机。 方向盘向左转到底。
- 转动机器，使机器处于正前方位置。 接合停车制动器。 关闭发动机。
- 测量塞子 (2) 的厚度。 塞子应压缩至 19 ± 3 mm (0.75 ± 0.12 in) 的厚度。
- 如需要，调节转向空档器螺钉 (3) 直到尺寸正确。 重复步骤 2 至 7。
Show/hide table
| 图 3 | g00102139 |
(3) 空档器螺钉 | |
- 对右转向止点重复本步骤。
Caterpillar Information System:
966G Wheel Loader and 972G Wheel Loader Power Train Output Transfer Gears
992G Wheel Loader Machine Systems Ride Control Valve - Remove
613C Series II Wheel Tractor-Scraper Machine Systems Vane Motor (Elevator) - Disassemble
D6G Track-Type Tractor Power Train Final Drive Gear, Idler Pinion and Bearings - Remove
992G Wheel Loader Machine Systems Ride Control Valve - Disassemble
3306B Industrial Engine Air Tank Moisture and Sediment - Drain - If Equipped
D6G Track-Type Tractor Power Train Final Drive Case - Remove and Install
966G Wheel Loader and 972G Wheel Loader Power Train Transmission Planetary
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Steering Neutralizer Valve - Check and Adjust
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Pilot Valve (Steering) Supply Pressure - Test and Adjust
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Steering Pilot System Pressure - Test
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Relief Valve (Pump Backup) - Test and Adjust - Command Control Steering
994D Wheel Loader Power Train Rollover Protective Structure (ROPS)
613C Series II Wheel Tractor-Scraper Machine Systems Vane Motor (Elevator) - Assemble
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Leakage - Test
902 and 906 Compact Wheel Loaders Hydraulic System Lift Cylinder
Repair of Boom and Bucket Stop Alignment{6107, 6501} Repair of Boom and Bucket Stop Alignment{6107, 6501}
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Disassemble
615C Series II Wheel Tractor-Scraper Machine Systems Pilot Control Valve (Elevator) - Assemble
994D Wheel Loader Power Train Rim Mounting
992G Wheel Loader Machine Systems Ride Control Valve - Install
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Remove
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Install
994D Wheel Loader Power Train Torque Converter System Specifications