Output Transfer Gears
Show/hide table
| |
| Illustration 1 | g06079357 |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 1 | 2 | 318-1178 Speed Sensor Gp | Torque to |
| 2 | 1 | 322-3111 Shim Pack | Use as required in order to obtain Thickness is |
| 3 | 1 | 4D-1577 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
| 4 | - | - | Apply Loctite 330 to the surfaces. |
| 5 | 2 | 193-2200 Lip Type Seal | Lubricate the bore lightly with the lubricant that is being sealed.
Install lip seal flush with the face of the bearing cage. |
| 6 | 2 | 8T-0358 Bolt | Apply red Loctite 263 to the threads. |
| 7 | 1 | 175-7905 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
| 8 | 2 | 5H-6734 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
| 9 | - | - | Apply Loctite 592 or may use alternate sealant. |
| 10 | 1 | 138-1509 Ecology Drain Gp | Torque to |
Caterpillar Information System:
992G Wheel Loader Machine Systems Ride Control Valve - Remove
613C Series II Wheel Tractor-Scraper Machine Systems Vane Motor (Elevator) - Disassemble
D6G Track-Type Tractor Power Train Final Drive Gear, Idler Pinion and Bearings - Remove
992G Wheel Loader Machine Systems Ride Control Valve - Disassemble
3306B Industrial Engine Air Tank Moisture and Sediment - Drain - If Equipped
D6G Track-Type Tractor Power Train Final Drive Case - Remove and Install
966G Wheel Loader and 972G Wheel Loader Power Train Transmission Planetary
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Steering Neutralizer Valve - Check and Adjust
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Pilot Valve (Steering) Supply Pressure - Test and Adjust
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Steering Pilot System Pressure - Test
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Relief Valve (Pump Backup) - Test and Adjust - Command Control Steering
613C Series II Wheel Tractor-Scraper Machine Systems Floor Dump Arm - Remove and Install
992G Wheel Loader and 854G Wheel Dozer Steering System Steering Neutralizer Valve - Check and Adjust
994D Wheel Loader Power Train Rollover Protective Structure (ROPS)
613C Series II Wheel Tractor-Scraper Machine Systems Vane Motor (Elevator) - Assemble
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Leakage - Test
902 and 906 Compact Wheel Loaders Hydraulic System Lift Cylinder
Repair of Boom and Bucket Stop Alignment{6107, 6501} Repair of Boom and Bucket Stop Alignment{6107, 6501}
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Disassemble
615C Series II Wheel Tractor-Scraper Machine Systems Pilot Control Valve (Elevator) - Assemble
994D Wheel Loader Power Train Rim Mounting
992G Wheel Loader Machine Systems Ride Control Valve - Install
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Remove
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Install