Elevator Control Valve - Assemble
Assembly Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1P-0510     | Driver Group     | 1     |
- Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
- Install O-ring seal (61) to top seat (57) . Install the ball and O-ring seal (60) to bottom seat (59) .
Show/hide table
Illustration 1 | g00423826 |
- Install bottom seat (59) and ball (58) to elevator control valve (3) . Install top seat (57) to elevator control valve (3) .
Show/hide table
Illustration 2 | g00446784 |
- Install plug (56) and the O-ring seal to elevator control valve (3) .
Show/hide table
Illustration 3 | g00446785 |
- Install washer (55) , spring (54) , retainer (53) and ring (52) to spool valve (42) .
Show/hide table
Illustration 4 | g00423821 |
- Install O-ring seal (51) , stop (50) and valve (49) to elevator control valve (3) .
Show/hide table
Illustration 5 | g00423820 |
- Use Tool (A) to install lip seal (48) and install O-ring seal (47) to cover (46) . Lubricate lip seal (48) lightly with the lubricant that is being sealed.
Show/hide table
Illustration 6 | g00423819 |
- Install cover (46) and two bolts (45) to elevator control valve (3) . Install swivel adapter (44) to cover (46) and tighten retaining nut (43) .
Show/hide table
Illustration 7 | g00423818 |
- Install spool valve (42) and two springs (41) to elevator control valve (3) .
Show/hide table
Illustration 8 | g00423797 |
- Install retaining ring (40) , retainer (39) , O-ring seal (39) and valve seat (37) to cover (17) .
Show/hide table
Illustration 9 | g00423796 |
- Install four balls (36) , retainer (35) , retaining ring (34) and retaining ring (33) to cover (17) . Install six O-ring seals (32) to cover (17) .
Show/hide table
Illustration 10 | g00423795 |
- Install cover (17) and four bolts (31) to elevator control valve (3) .
Show/hide table
Illustration 11 | g00423794 |
- Install valve (30) , spring (29) , 14 shims (28) , O-ring seal (27) and plug (26) to cover (17) .
Show/hide table
Illustration 12 | g00423793 |
- Install spring (25) and O-ring seal (24) to cover (17) .
Show/hide table
Illustration 13 | g00423791 |
- Install swivel adapter (23) to valve housing (16) and tighten retaining nut (22) . Install O-ring seal (21) , plug (20) , spool valve (19) and retainer (18) to valve housing (16) .
Show/hide table
Illustration 14 | g00423790 |
- Install valve housing (16) and two bolts (15) to cover (17) .
Show/hide table
Illustration 15 | g00423788 |
- Install plug (14) , valve (13) , spring (12) , O-ring seal (11) , cover (10) and two bolts (9) to diverter valve (2) .
Show/hide table
Illustration 16 | g00423787 |
- Install cover (8) and two bolts (7) to diverter valve (2) . Install swivel adapter (6) to cover (8) and tighten retaining nut (5) . Install O-ring seal (4) to diverter valve (2) .
Show/hide table
Illustration 17 | g00423786 |
- Install diverter valve (2) and bolt (1) to elevator control valve (3) .
Show/hide table
Illustration 18 | g00423783 |
End By: Install the elevator control valve. Refer to Disassembly and Assembly, "Elevator Control Valve - Install". The information is in this manual.
Caterpillar Information System:
994D Wheel Loader Power Train Torque Converter System Specifications
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Install
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Remove
992G Wheel Loader Machine Systems Ride Control Valve - Install
994D Wheel Loader Power Train Rim Mounting
615C Series II Wheel Tractor-Scraper Machine Systems Pilot Control Valve (Elevator) - Assemble
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Disassemble
Repair of Boom and Bucket Stop Alignment{6107, 6501} Repair of Boom and Bucket Stop Alignment{6107, 6501}
902 and 906 Compact Wheel Loaders Hydraulic System Lift Cylinder
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Leakage - Test
613C Series II Wheel Tractor-Scraper Machine Systems Vane Motor (Elevator) - Assemble
994D Wheel Loader Power Train Rollover Protective Structure (ROPS)
994D Wheel Loader Power Train Temperature Sensor (Torque Converter Outlet Oil)
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Coolant Temperature Switch
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System Backup Alarm
D6G Track-Type Tractor Power Train Final Drive Gear, Idler Pinion and Bearings - Install
994D Wheel Loader Power Train Speed Sensor (Transmission Output)
966G Wheel Loader and 972G Wheel Loader Power Train Engine and Transmission Mounting
615C Series II Wheel Tractor-Scraper Machine Systems Diverter Valve (Elevator) - Disassemble
994D Wheel Loader Secondary Steering
992G Wheel Loader Machine Systems Boom - Remove
D6G Track-Type Tractor Power Train Sprocket Shaft - Remove
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Crankshaft
D6G Track-Type Tractor Power Train Sprocket Shaft - Install