Backup Alarm
Show/hide table
| Backup Alarm - The alarm sounds when the transmission direction selector is in the REVERSE position. The alarm alerts the people behind the machine that the machine is backing up. |
The backup alarm is on the rear of the machine.
Show/hide table
 | |
| Illustration 1 | g00038246 |
A three-position switch is at the rear of the machine. The three positions on the switch are high, low, and medium. The three-position switch regulates the volume of the alarm.
The alarm is set from the factory at the highest sound level. The setting should remain on high, unless the job site requires a lower sound level.
Caterpillar Information System:
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Coolant Temperature Switch
994D Wheel Loader Power Train Temperature Sensor (Torque Converter Outlet Oil)
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Assemble
994D Wheel Loader Power Train Torque Converter System Specifications
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Install
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Remove
992G Wheel Loader Machine Systems Ride Control Valve - Install
994D Wheel Loader Power Train Rim Mounting
615C Series II Wheel Tractor-Scraper Machine Systems Pilot Control Valve (Elevator) - Assemble
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Disassemble
Repair of Boom and Bucket Stop Alignment{6107, 6501} Repair of Boom and Bucket Stop Alignment{6107, 6501}
902 and 906 Compact Wheel Loaders Hydraulic System Lift Cylinder
D6G Track-Type Tractor Power Train Final Drive Gear, Idler Pinion and Bearings - Install
994D Wheel Loader Power Train Speed Sensor (Transmission Output)
966G Wheel Loader and 972G Wheel Loader Power Train Engine and Transmission Mounting
615C Series II Wheel Tractor-Scraper Machine Systems Diverter Valve (Elevator) - Disassemble
994D Wheel Loader Secondary Steering
992G Wheel Loader Machine Systems Boom - Remove
D6G Track-Type Tractor Power Train Sprocket Shaft - Remove
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Crankshaft
D6G Track-Type Tractor Power Train Sprocket Shaft - Install
966G Wheel Loader and 972G Wheel Loader Power Train Drive Shaft
992G Wheel Loader Machine Systems Boom - Install
D6G Track-Type Tractor Power Train Final Drive Pinion and Flange - Remove