Radiator - Assemble
Assembly Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 2     |
- Position gasket (14) and radiator tank assembly (13). Position eight spacers (12) and install 92 bolts, nuts and washers (11) .
Note: Check the condition of gaskets (14). Replace worn gaskets and damaged gaskets. Use only new Caterpillar parts.
Show/hide table
Illustration 1 | g00416698 |
- Fasten a hoist, Tool (A) and a nylon lifting strap to core assembly (9) .
Show/hide table
Illustration 2 | g00416692 |
- Position core assembly (9) into the radiator housing and install two nuts (10) .
Show/hide table
Illustration 3 | g00416695 |
- Position fan housing (8) and install eight bolts (7) .
Show/hide table
Illustration 4 | g00416561 |
- Position expansion tank (6) and install two nuts (4) and six bolts (5) .
Show/hide table
Illustration 5 | g00415459 |
- Install tube assembly (3) and install bolt (2) .
Show/hide table
Illustration 6 | g00415453 |
- Connect hose assembly (1) .
Show/hide table
Illustration 7 | g00415438 |
End By: Install the radiator. Refer to Disassembly and Assembly, "Radiator - Install". The information is in this manual.
Caterpillar Information System:
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Chain Adjustment Idler - Assemble
613C Series II Wheel Tractor-Scraper Machine Systems Elevator Chain Adjustment Idler - Disassemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Window Wiper and Wiper Motor (Rear) - Remove
994D Wheel Loader Power Train Electronic Control Module (Power Train) - Pinout Specifications
966G Wheel Loader and 972G Wheel Loader Power Train Oil Filter (Power Train)
992G Wheel Loader Machine Systems Ride Control Accumulator - Assemble
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Camshaft
966G Wheel Loader and 972G Wheel Loader Machine Systems Vane Pump (Pilot and Braking) - Assemble
966G Wheel Loader and 972G Wheel Loader Power Train Transmission Oil Pump
992G Wheel Loader Machine Systems Ride Control Accumulator - Install
966G Wheel Loader and 972G Wheel Loader Machine Systems Vane Pump (Pilot and Braking) - Disassemble
966G Wheel Loader and 972G Wheel Loader Power Train Speed Sensor (Torque Converter Output)
966G Wheel Loader and 972G Wheel Loader Power Train Transmission Hydraulic Control
D9R Track-Type Tractor Battery Disconnect Switch
902 and 906 Compact Wheel Loaders Hydraulic System Accumulator (Pilot Oil)
953C Track-Type Loader Power Train Speed and Direction Control
994D Wheel Loader Engine and Machine Warm-Up
621F Wheel Tractor-Scraper Maintenance Interval Schedule
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Command Control Steering - Adjust
623F Wheel Tractor-Scraper Maintenance Interval Schedule
3406E and 3456 Engines for Caterpillar Built Machines Fuel System
966G Wheel Loader and 972G Wheel Loader Power Train Pinout Specifications for Electronic Control (Power Train)
966G Wheel Loader and 972G Wheel Loader Machine Systems Piston Pump (Steering) - Remove
966G Wheel Loader and 972G Wheel Loader Machine Systems Piston Pump (Steering) - Install