Electrical Problems And Malfunctions
Usage:
WHEEL LOADERS938G (6WS565-1290),
IT38G (1CW327-341),
950G (5FW217-773, 2JS251-543),
962G (7BW210-378, 3BS217-384),
966FII (9YJ4662-5265),
970F (9JK821-879),
980G (9CM985-1138) WHEEL LOADERS
IT38G (1CW327-341),
950G (5FW217-773, 2JS251-543),
962G (7BW210-378, 3BS217-384),
966FII (9YJ4662-5265),
970F (9JK821-879),
980G (9CM985-1138) WHEEL LOADERS
Problem:
Electrical problems have been reported on above listed machine S/N ranges. Sometimes Service Code 248-F02 (Cat Data Link) is shown up on CMS display. It can happen machines are stopped and it is not possible to start them again.
Solution:
The root cause of the problem can be in loose connections in the electrical box located in the engine compartment. In case of electrical problem, open the electrical box and verify that all wire connections are correctly tightened on switches, relays, breakers, ...
Show/hide table
 |
Before to intervene in the electrical box, the main circuit switch must be turned OFF to avoid short circuits. |
 |
CATERPILLAR BELGIUM MEDIUM WHEEL LOADERS COPYRIGHT 1999 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
Actions That May Cause Inadvertent Dropping Of Pallet Forks Actions That May Cause Inadvertent Dropping Of Pallet Forks
Fan Drive Bearing Failures Fan Drive Bearing Failures
Bolt Loosening On Lower Articulated Hitch Bolt Loosening On Lower Articulated Hitch
New 9.6X Class Of Vims On Board Source Software Now Available New 9.6X Class Of Vims On Board Source Software Now Available
Seat Looseness - Conversion To Floor Mounted Controls Seat Looseness - Conversion To Floor Mounted Controls
Kickout Positioner Adjustment Kickout Positioner Adjustment
Harsh Shifting Harsh Shifting
785 Steering Pump (4T-0382) Installation/Start-Up 785 Steering Pump (4T-0382) Installation/Start-Up
Machining Premachined Valve Seat Inserts Machining Premachined Valve Seat Inserts
Modification To Cooling System Prevents Hydraulic Oil System Overheating In Very Cold Operating Environments Modification To Cooling System Prevents Hydraulic Oil System Overheating In Very Cold Operating Environments
Correct Packaging Of Transmission Rotating Seals Correct Packaging Of Transmission Rotating Seals
For Calibration Of Transmission Clutch Engagement - Use Only 4C-8195 Control Service Tool For Calibration Of Transmission Clutch Engagement - Use Only 4C-8195 Control Service Tool
Alternator Drive Belt Retention Alternator Drive Belt Retention
Correct Service Replacement Part Numbers For 100-5778 Caterpillar Monitoring System Control Correct Service Replacement Part Numbers For 100-5778 Caterpillar Monitoring System Control
Reported Failtures Of Lift/Tilt Pressure Sensor Reported Failtures Of Lift/Tilt Pressure Sensor
Missing Rear Gear Train Idler Shaft Mounting Bolt Seals May Result In Oil Leaks Missing Rear Gear Train Idler Shaft Mounting Bolt Seals May Result In Oil Leaks
4T (4T3130-4T3134) Series HPCU Filters May Delay Ability To Move Machine With Cold Oil 4T (4T3130-4T3134) Series HPCU Filters May Delay Ability To Move Machine With Cold Oil
Roller Retainer Bolt Loosening Roller Retainer Bolt Loosening
Warming The Hydraulic System Warming The Hydraulic System
Rotation Of Coupler Pins Causes Difficulty Coupling Work Tools Rotation Of Coupler Pins Causes Difficulty Coupling Work Tools
Transmission Serial Number Prefixes Transmission Serial Number Prefixes
Secondary Steering Pumps Installation Changed Secondary Steering Pumps Installation Changed
Water Drainage Holes For Loader Frame Water Drainage Holes For Loader Frame
Roof Assembly May Break During Transport Roof Assembly May Break During Transport