Secondary Steering Pumps Installation Changed
Usage:
WHEEL LOADERS938F (2RM1265-1301) WHEEL LOADERS
Problem:
Secondary steering pump (ref 1392327) having a suction flanged port instead of a threaded port have been installed on 30 consecutive machines with a secondary steering attachment, starting from 2RM01265.
Solution:
Here is the list of parts that are different on those 30 machines:
When the complete secondary steering pump (1392327) has to be replaced on machines listed above, the following parts are needed.
CATERPILLAR BELGIUM MEDIUM WHEEL LOADERS COPYRIGHT 1999 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
Transmission Serial Number Prefixes Transmission Serial Number Prefixes
Rotation Of Coupler Pins Causes Difficulty Coupling Work Tools Rotation Of Coupler Pins Causes Difficulty Coupling Work Tools
Warming The Hydraulic System Warming The Hydraulic System
Roller Retainer Bolt Loosening Roller Retainer Bolt Loosening
4T (4T3130-4T3134) Series HPCU Filters May Delay Ability To Move Machine With Cold Oil 4T (4T3130-4T3134) Series HPCU Filters May Delay Ability To Move Machine With Cold Oil
Missing Rear Gear Train Idler Shaft Mounting Bolt Seals May Result In Oil Leaks Missing Rear Gear Train Idler Shaft Mounting Bolt Seals May Result In Oil Leaks
Reported Failtures Of Lift/Tilt Pressure Sensor Reported Failtures Of Lift/Tilt Pressure Sensor
Correct Service Replacement Part Numbers For 100-5778 Caterpillar Monitoring System Control Correct Service Replacement Part Numbers For 100-5778 Caterpillar Monitoring System Control
Alternator Drive Belt Retention Alternator Drive Belt Retention
Electrical Problems And Malfunctions Electrical Problems And Malfunctions
Actions That May Cause Inadvertent Dropping Of Pallet Forks Actions That May Cause Inadvertent Dropping Of Pallet Forks
Fan Drive Bearing Failures Fan Drive Bearing Failures
Water Drainage Holes For Loader Frame Water Drainage Holes For Loader Frame
Roof Assembly May Break During Transport Roof Assembly May Break During Transport
Speed Hold Control May Not Disengage Speed Hold Control May Not Disengage
Lack Of Spring Stiffness In Pilot Valve May Cause Decreased Prefeel Lack Of Spring Stiffness In Pilot Valve May Cause Decreased Prefeel
Clogged Atmospheric Pressure Sensors Clogged Atmospheric Pressure Sensors
A Nuisance Mid 82 CID 358 FMI 05 Service Code May Be Logged By The Implement Electronic Control Module A Nuisance Mid 82 CID 358 FMI 05 Service Code May Be Logged By The Implement Electronic Control Module
Undesired Machine Movement May Occur Under Certain Conditions Undesired Machine Movement May Occur Under Certain Conditions
Service Replacement Of Electronic Monitoring System (EMS) Module May Also Require Installation Of New Engine Software Service Replacement Of Electronic Monitoring System (EMS) Module May Also Require Installation Of New Engine Software
Air Filter Identification Film Air Filter Identification Film
Machine Equipped With Roading Fenders Machine Equipped With Roading Fenders
Machine Suddenly Loses Hydraulic Pressure Because Implement System Relief Valve Comes Apart Machine Suddenly Loses Hydraulic Pressure Because Implement System Relief Valve Comes Apart
Return Failed Cylinders from the Operator Console of Motor Graders Return Failed Cylinders from the Operator Console of Motor Graders