PRODUCT SUPPORT PROGRAM FOR UPDATING THE ROUTING OF THE FUEL SUPPLY AND FUEL RETURN LINES ON CERTAIN D10T TRACK-TYPE TRACTORS Caterpillar
PRODUCT SUPPORT PROGRAM FOR UPDATING THE ROUTING OF THE FUEL SUPPLY AND FUEL RETURN LINES ON CERTAIN D10T TRACK-TYPE TRACTORS
Usage:
TEBE4760-00
Show/hide table
31May2016
E140
Show/hide table
Containment -
Before/After
(Limited distribution)
PRODUCT SUPPORT PROGRAM FOR UPDATING THE ROUTING OF THE FUEL SUPPLY AND FUEL RETURN LINES ON CERTAIN D10T TRACK-TYPE TRACTORS
1261 1274
PS90601
Show/hide table
NOTE:
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
NOTE:
This Containment Program can be administered either before or after a failure occurs.
In either case the decision whether to apply the Program is made by the dealer and service rep. Obtain the service reps Goodwill Approver Code
before completing the repair. EAME dealers should use their standard Industry Group specific goodwill approval codes. The Goodwill Approver Code must be included when submitting the claim.
Show/hide table
NOTE:
When reporting the repair, use "PS90601" as the Part Number and "7777" as the Group Number.
If administered before failure, use "56" as Warranty Claim Description and "T" as the SIMS Description Code. If administered after failure, use "96" as Warranty Claim Description Code and use "Z" as the SIMS Description Code.
NOTE:
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
Show/hide table
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE
31May2018
PROBLEM
Show/hide table
Certain D10T Track-Type Tractors have had machine fuel line hose assemblies showing abrasion marks from fouling conditions. Severe abrasion could lead to a symptom of fuel leaking from the hose assemblies.
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 32% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Show/hide table
Refer to the attached Rework Procedure.
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
Product smu/age whichever comes first
Caterpillar
Dealer Suggested
Customer Suggested
Parts %
Labor Hrs%
Parts %
Labor Hrs%
Parts %
Labor Hrs%
0-100000 hrs, 0-180 mo
100.0%
100.0%
0.0%
0.0%
0.0%
0.0%
Show/hide table
NOTE: This is a 16.0-hour job
If there has been a previous repair, part age/hours will apply. Retain a copy of the previous repair invoice in the dealer's records for audit purposes, and specify repair date and machine hours in the "Additional Comments" section of the warranty claim.
Show/hide table
PARTS DISPOSITION
Show/hide table
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Show/hide table
D10T Fuel Supply and Return Hose Assembly Routing Updates.