3412E Petroleum Engine Caterpillar


E100 Low Engine Oil Pressure Warning

Usage:

3412E Z2D
Conditions Which Generate This Code:

The Electronic Control Module (ECM) detects the following condition:

The engine oil pressure has dropped below the warning trip point for low oil pressure protection for at least five seconds.

System Response:

The ECM will log the warning.

  • Low power

Test Step 1. Check the Engine Oil Level

  1. Turn the keyswitch to the OFF position.

  1. Check the engine oil level.

    Refer to Operation and Maintenance Manual, "Engine Oil Level - Check".

Expected Result:

The engine oil level is OK.

Results:

  • OK - The engine oil level is OK. There may be a problem with the engine's lubrication system.

    Repair: Refer to Testing and Adjusting, "Engine Oil Pressure - Test".

    STOP

  • Not OK - The engine oil level is low.

    Repair: Add engine oil to the proper level. Verify that the repair eliminates the problem.

    STOP

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.