C15 Petroleum Engines Caterpillar


Fuel Transfer Pump - Remove

Usage:

C15 HAZ

Removal Procedure


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.

Dispose of all fluids according to local regulations and mandates.



NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.


  1. Turn the fuel shutoff valve to the “OFF” position.

  2. Disconnect the fuel supply line at the fuel transfer pump.


    Illustration 1g01071191

  3. Disconnect the tube assembly (3) from fuel transfer pump (2).

  4. Remove bolts (1).

  5. Remove fuel transfer pump (2) from front housing (4).

  6. Remove the O-ring seal from the fuel transfer pump.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.