G3408C and G3412C Engines Caterpillar

The following literature can be obtained through any Caterpillar dealer.

Lubricants

• Data Sheet, PEHP0004, "Cat NGEO (Natural Gas Engine Oil) SAE30 and SAE40"

• Data Sheet, PEHJ0006, "Cat NGEO EL350 (Natural Gas Engine Oil) SAE40"

• Special Publication, SEBD0640, "Oil and Your Engine"

• Special Publication, PEDP1129, "Listen To Your Oil"

• Special Instruction, PEHP6001, "How To Take A Good Oil Sample"

• Special Publication, PEGJ0035, "Grease Selection Guide"

• Data Sheet, PEHJ0088, "Cat Multipurpose Grease"

• Data Sheet, PEHP0002, "Cat Advanced 3Moly Grease"

• Data Sheet, NEHP6015, "Cat High Speed Ball Bearing Grease"

• Special Publication, SEBU6400, "Caterpillar Gas Engine Lubricant, Fuel, and Coolant Recommendations"

• Special Publication, PECP9067, "One Safe Source"

Fuels

• Data Sheet, LEKQ9360, "Internal Combustion Engine Fuel Gases"

• Data Sheet, LEKQ2364, "US Stationary Engine Regulations/Spark Ignited Emissions"

• Data Sheet, LEKQ5404, "Fuels Specifications Changes"

• Application and Installation Guide, LEKQ7256, "Fuels, Fuel Systems"

• Application and Installation Guide, LEKQ7260, "Low Energy Fuels"

• Special Publication, SEBU6400, "Caterpillar Gas Engine Lubricant, Fuel, and Coolant Recommendations"

Coolants

• Data Sheet, PEHJ0040, "Cat NGEC (Natural Gas Engine Coolant 50/50 Premix)"

• Data Sheet, PEHP9554, "Cat DEAC (Diesel Engine Antifreeze/Coolant Concentrate)"

• Data Sheet, LEKQ8567, "Water Treatment Recommendations for Ebullient and Solid Water Cooled Engines"

• Special Publication, PEDP5033, "S·O·S Coolant Analysis"

• Special Publication, SEBD0518, "Know Your Cooling System"

• Special Publication, SEBD0970, "Coolant and Your Engine"

• Special Publication, SEBU6400, "Caterpillar Gas Engine Lubricant, Fuel, and Coolant Recommendations"

Miscellaneous

• Systems Operation, KENR5186, "G3408C and G3412C" Engines Air/Fuel Ratio Control (NO_x Feedback)

• Troubleshooting, RENR5916, "Air/Fuel Ratio Control"

• Service Manual, RENR1340, "G3408C Engine"

• Specifications, SENR3130, "Torque Specifications"

• Special Instruction, SMHS7001, "Assembly of Fan Drive Pulley Assemblies"

• Special Instruction, SEHS9124, "Cleaning and Drying of Electric Set Generators"

• Special Instruction, SEHS7332, "Do Not Operate Tag"

• Special Instruction, SEHS7633, "Battery Test Procedure"

• Special Instruction, SEHS7654, "Alignment- General Instructions"

• Special Instruction, SEHS8712, "Using the 8T-2700 Blowby/Airflow Indicator Group"

• Special Instruction, SEHS9031, "Storage Procedure for Caterpillar Products"

• Special Instruction, SEHS9298, "Installation and Maintenance of Gaseous Fuel Filters"

• Special Instruction, REHS0371, "Installation and Initial Start-Up Procedure for G3300 and G3400 Engines"

• Special Publication, NENG2500, "Caterpillar Dealer Service Tools Catalog"

• Special Publication, SEBF8029, "Index to Guidelines for Reusable Parts and Salvage Operations"

• Special Publication, SEBF8062, "Procedure to Inspect and Clean Air Filters"

Additional Reference Material

The "Engine Fluids Data Book" can be obtained from the following locations: local technological society, local library and local college. If necessary, consult EMA at the following address:

Engine Manufacturers Association
Two North LaSalle Street, Suite 2200
Chicago, Illinois, USA 60602
E-mail: ema@enginemanufacturers.org
(312) 827-8700
Facsimile: (312) 827-8737

The "Society of Automotive Engineers (SAE) Specifications" can be found in your SAE handbook. This publication can also be obtained from the following locations: local technological society, local library and local college. If necessary, consult SAE at the following address:

SAE International
400 Commonwealth Drive
Warrendale, PA, USA 15096-0001
Telephone (724) 776-4841

The "American Petroleum Institute Publication No. 1509" can be obtained from the following locations: local technological society, local library and local college. If necessary, consult API at the following address:

American Petroleum Institute
1220 L St. N.W.
Washington, DC, USA 20005
Telephone (202) 682-8000

The International Organization for Standardization (ISO) offers information and customer service regarding international standards and standardizing activities. ISO can also supply information on the following subjects that are not controlled by ISO: national standards, regional standards, regulations, certification and related activities. Consult the member of ISO in your country.

International Organization for Standardization (ISO)
1, rue de Varembé
Case postale 56
CH-1211 Genève 20
Switzerland
Telephone +41 22 749 01 11
Facsimile +41 22 733 34 30
E-mail central@iso.ch
Web site http://www.iso.ch

European classifications are established by the Counseil International Des Machines a Combustion (CIMAC) (International Council on Combustion Engines).

CIMAC Central Secretariat
Lyoner Strasse 18
60528 Frankfurt
Germany
Telephone +49 69 6603 1567
Facsimile +49 69 6603 1566