Fuel Priming Pump - Remove and Install
Show/hide table
| 注意 |
|---|
|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将供油开关置于“OFF”位置。
Show/hide table
图 1 g01049296 - 拆卸螺栓 (2)。 从燃油滤清器底座 (4) 上卸下注油泵组件 (1)。
- 从注油泵和燃油滤清器底座上卸下密封垫 (3)。
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将密封垫 (3) 安置在燃油滤清器底座 (4) 上。
- 将注油泵组件 (1) 安置在燃油滤清器底座上，安装螺栓 (2)。
- 将供油开关置于“ON”位置。
- 排出系统中的空气。 请参阅测试和调整, "燃油系统 - 充油"。
Show/hide table
| |
| 图 2 | g01049296 |
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Engine Will Not Crank
C7 Marine Engine Sensors and Electrical Components
C-15 Petroleum Engine Plate Locations and Film Locations
C7 Marine Engine Electronic Unit Injector
2004/04/01 Engine Harness Assembly (Bypass) Flashes Messenger When Communication Through the Service Connector is Not Possible {0779, 0781}
C11 and C13 Petroleum Engines Starting Motor - Inspect - If Equipped
G3600 Engines Additional Messages
C7 Marine Engine Cylinder Block Cover Group
C-10 Petroleum Engine Engine Oil and Filter - Change
3408B and 3408C Industrial and Marine Engines Turbocharger
3126B Petroleum Engine Belt - Inspect
3512B Petroleum Engine Battery or Battery Cable - Disconnect
C13, C15, and C18 Generator Set Engines CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
2004/02/01 Lubricate O-Ring Seals Prior to Installing the Wastegate Control Solenoid {1057, 5479}
C15 and C18 Engines for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Alternator - Remove and Install
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply System Startup
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply System Shutdown
2006/05/01 New Gaskets Are Now Available For The Oil Filter Base And The Oil Cooler. {1306, 1378}
G3304B and G3306B Engines Belts - Inspect/Adjust/Replace
C15 and C18 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
3612 and 3616 Fast Vessel Engines Refill Capacities and Recommendations
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install