C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Engine Oil Pressure Sensor - Remove and Install

Usage:

631E 1AB


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。



注意

在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。

有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。

按照当地法规和要求处置所有液体。




图 1g01117091

(1) 发动机机油压力传感器 ... 10 ± 2 N·m (89 ± 18 lb in)

Caterpillar Information System:

3612 and 3616 Fast Vessel Engines Refill Capacities and Recommendations
C15 and C18 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
G3304B and G3306B Engines Belts - Inspect/Adjust/Replace
2006/05/01 New Gaskets Are Now Available For The Oil Filter Base And The Oil Cooler. {1306, 1378}
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply System Shutdown
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply System Startup
C15 and C18 Engines for Caterpillar Built Machines Alternator - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
2004/02/01 Lubricate O-Ring Seals Prior to Installing the Wastegate Control Solenoid {1057, 5479}
C13, C15, and C18 Generator Set Engines CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C15 and C18 Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Engine Will Not Crank
C15 and C18 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Crankshaft Position Sensor - Remove and Install
3126B Marine Engines Digital Sensor Supply Circuit - Test
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Load Cell - Calibrate
C12 Marine Engine Fuel System
C15 and C18 Engines for Caterpillar Built Machines Camshaft Position Sensor - Remove and Install
C13, C15, and C18 Generator Set Engines Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Fuel Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
C-10 and C-15 Petroleum Engines Sensors and Electrical Connectors
2004/03/01 New Gaskets Are Now Available For The Oil Filter Base And The Oil Cooler. {1306, 1378}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.