New Gaskets Are Now Available For The Oil Filter Base And The Oil Cooler. {1306, 1378}
- Engine:
- 3116 DI T (S/N: 4PG1-UP)
- 3116 (S/N: 2MR1-UP)
- 3126 (S/N: 6MK1-UP)
- 3126 TA (S/N: 6SR1-UP)
- 3126 (S/N: 6MS1-UP)
- 3126B (S/N: 9ZF1-UP; BEJ1-UP; DCS1-UP; 7AS1-UP)
Show/hide table
 | |
| Illustration 1 | g01051323 |
Typical Example | |
New gaskets for the oil filter base and the oil cooler are now available. The new gaskets have been released in order to prevent leaking from the oil filter base to the oil cooler and from the joint of the oil cooler to the cylinder block. The current 7C-1160 Gasket is replaced by the 233-7655 Gasket (1). The current 7E-9817 Gasket for the oil filter base is replaced by the 233-7654 Gasket (2). The new gaskets should be used as a set. There are also new O-ring seals that are available. The new O-ring seals seal the joint of the oil cooler to the cylinder block. The current 8M-4445 O-Ring Seals are replaced by 3P-1156 O-Ring Seals. The new gaskets and seals are available in the 250-9214 Oil Cooler Lines and Gasket Kit.
Caterpillar Information System:
C-10 and C-15 Petroleum Engines Sensors and Electrical Connectors
C15 and C18 Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Fuel Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
C13, C15, and C18 Generator Set Engines Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines Camshaft Position Sensor - Remove and Install
C12 Marine Engine Fuel System
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Load Cell - Calibrate
3126B Marine Engines Digital Sensor Supply Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines Crankshaft Position Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
2011/01/31 New Gaskets Are Now Available for the Oil Filter Base and the Oil Cooler on Certain 3116, 3126, and C7 Machines Engines {1306, 1378}
C18 Emergency Diesel Generator Set Gear Group (Front)
3412 Generator Set Engines Flywheel
C15 and C18 Engines for Caterpillar Built Machines Speed/Timing Sensor
C13, C15, and C18 Generator Set Engines Flywheel Housing
G3512E Generator Set Engines Engine Oil Pump
3126B Marine Engines E100 Low Engine Oil Pressure Warning
G3600 Engines Refill Capacities and Recommendations
SCJ and 8SC Series Alternators General Information
C13, C15, and C18 Generator Set Engines Engine Oil Pan
C13, C15, and C18 Generator Set Engines Housing (Front)
3126B Marine Engines Engine Pressure Sensor Open or Short Circuit - Test