Digital Multimeter Group (Clamp on) Rated at 2000 Amps Available for Electric Power Generation Applications {0709, 0785}
- Electric Power Generation:
- All
Show/hide table
Illustration 1 | g01046092 |
The 227-4324 Digital Multimeter Gp (Clamp on) allows the technician to perform accurate and reliable measurements on electric power generation equipment. The multimeter handles current component analysis for AC and DC circuits up to 2000 amps.
Features and Benefits
- The digital multimeter group features autoranging and autozeroing functionality for quick and easy use.
- The clamp on design measures current without a direct electrical connection.
- The digital multimeter group quickly handles the standard Ohms, continuity and diode tests.
- True root mean square (RMS) measurements can be made on complex and distorted wave forms.
- The digital multimeter group also measures the maximum RMS surge and retains the data.
- This digital multimeter group has an analog port for connecting the meter to a data recorder, to a logger, or to an oscilloscope. The analog cable comes with the digital multimeter group.
Show/hide table
Service Parts for the 227-4324 Digital Multimeter Gp (Clamp on)     | |
Pt. No.     | Description     |
232-3636     | Cable (Analog)     |
232-3637     | Carrying Case     |
Show/hide table
Specifications     | |
Electrical data     | All accuracies stated at 23° ± 1° C (73° ± 2° F)     |
Current measurement     | DC, DC RMS, AC RMS     |
Measuring range     | 0 to 2000 A DC or AC peak     |
Autorange facility     | 400 A/2000 A     |
Resolution     | 100 mA in 400 A range 1 A in 2000 A range     |
Accuracy     | 1 > 25 A ± 1.3% of reading ± 3 digits 1 < 25 A ± 1.0 A frequency range DC and 15 Hz to 1 kHz in DC RMS 15 Hz to 1 kHz in AC RMS     |
Frequency characteristics     | above 1 kHz     |
Signal amplitude     | 3 dB @ 5 kHz 6 dB @ 10 kHz     |
Crest factor     | 6 maximum     |
Maximum overload     | 10,000 A or AC RMS X frequency <400,000     |
DC RMS     | AC or DC coupling of the amps measurement respectively     |
Mechanical dimensions     | L 251 mm (9.9 inch) X W 98 mm (3.9 inch) X D 52 mm (2.0 inch)     |
Weight     | 500 g (1.1 lb)     |
Case material     | Bayblend T85MN     |
Jaw opening     | 55 mm (2.2 inch)     |
Caterpillar Information System:
C-10, C-12, C-15 and C-16 Industrial Engines Excessive White Smoke
2004/03/29 Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
C7 Marine Engine Engine Oil Pan
2004/05/01 Tools Released for the Removal and the Installation of the Camshaft and the Camshaft Bearings {0700, 0701, 0705}
C15 and C18 Generator Set Engines Valve Mechanism Cover Base - Remove and Install
C15 and C18 Industrial Engines Valve Mechanism Cover - Remove and Install
G3500 Engines Engine Crankcase Pressure (Blowby) - Test
2004/02/01 Improved Gasket for the Rear Crankshaft Seal Carrier {1161}
2004/02/16 Tool Released for Installing Contact Strips for the Charge Drain within the Flywheel Assembly {0785}
G3500 Engines Engine Speed Sensor - Adjust
C7 Marine Engine Gear Group (Front)
C13, C15, and C18 Generator Set Engines Poor Acceleration or Response
C12 Marine Engines Engine Air Cleaner Service Indicator - Inspect
C12 Marine Engines Engine Crankcase Breather - Clean
G3500 Engines Engine Oil Level Regulator
C7 Marine Engine Flywheel Housing
2004/11/01 Improved Fan Drives are Used {1359}
G3500 Engines Crankcase Breather
C15 and C18 Engines for Caterpillar Built Machines Housing (Front) - Remove
C15 and C18 Engines for Caterpillar Built Machines Housing (Front) - Install
C7 Marine Engine Fuel Filter Base
G3500 Engines Fumes Disposal System
3408E and 3412E Engines for Caterpillar Built Machines Injection Actuation Pressure Sensor
C9 Marine Engines and C9 Marine Generator Sets Air Inlet Heater - Remove