Fuel Filter Base
Show/hide table
 | |
| Illustration 1 | g01382570 |
Typical example | |
(A) Put 154-9731 Thread Lock Compound on the tapered end of the stud to the following distance. ... 7.6 ± 1.5 mm (.30 ± .06 inch)
(B) Distance from the sealing surface of the filter base to the end of the stud ... 24.6 ± 2.3 mm (0.97 ± 0.09 inch)
(C) Sealing surface of the stud
Note: Do not damage this surface.
(1) Torque for stud ... 68 ± 7 N·m (50.15 ± 5.16 lb ft)
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Housing (Front) - Install
C15 and C18 Engines for Caterpillar Built Machines Housing (Front) - Remove
G3500 Engines Crankcase Breather
2004/11/01 Improved Fan Drives are Used {1359}
C7 Marine Engine Flywheel Housing
G3500 Engines Engine Oil Level Regulator
C12 Marine Engines Engine Crankcase Breather - Clean
C12 Marine Engines Engine Air Cleaner Service Indicator - Inspect
2004/04/01 Digital Multimeter Group (Clamp on) Rated at 2000 Amps Available for Electric Power Generation Applications {0709, 0785}
C-10, C-12, C-15 and C-16 Industrial Engines Excessive White Smoke
2004/03/29 Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
C7 Marine Engine Engine Oil Pan
G3500 Engines Fumes Disposal System
3408E and 3412E Engines for Caterpillar Built Machines Injection Actuation Pressure Sensor
C9 Marine Engines and C9 Marine Generator Sets Air Inlet Heater - Remove
C9 Marine Engines and C9 Marine Generator Sets Air Inlet Heater - Install
3126B Petroleum Engine Auxiliary Water Pump
C7 Marine Engine Fuel Pressure Sensor - If Equipped
2004/03/29 Thermocouple Assembly (Exhaust) Measures Engine Exhaust Temperatures {0701, 0776, 0781}
C7 Marine Engine Engine Oil Temperature Sensor
C7 Marine Engine Coolant Level Sensor - If Equipped
C32 Marine Engine Cooling System
C32 Marine Engine Exhaust Temperature - Test
C32 Marine Engines Aftercooler - Test