Engine Crankcase Breather - Clean
Show/hide table
Illustration 1 | g01046003 |
Typical example (1) Crankcase breather |
Show/hide table
NOTICE |
---|
Perform this maintenance with the engine stopped. |
If the crankcase breather is not maintained on a regular basis, the crankcase breather will become plugged. A plugged crankcase breather will cause excessive crankcase pressure that may cause crankshaft seal leakage.
- Loosen the hose clamp and remove the hose from the breather cover.
- Loosen the four bolts for the breather cover and remove the breather cover.
- Remove the breather element and wash the breather element in solvent that is clean and nonflammable. Allow the breather element to dry.
- Install a breather element that is clean and dry. Install the breather cover and install the bolts. Refer to the Specifications, SENR3130, "Torque Specifications Module" for the proper torques.
- Install the hose. Install hose clamp. Refer to the Specifications, SENR3130, "Torque Specifications Module" for the proper torques.
Caterpillar Information System:
C12 Marine Engines Engine Air Cleaner Service Indicator - Inspect
2004/04/01 Digital Multimeter Group (Clamp on) Rated at 2000 Amps Available for Electric Power Generation Applications {0709, 0785}
C-10, C-12, C-15 and C-16 Industrial Engines Excessive White Smoke
2004/03/29 Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
C7 Marine Engine Engine Oil Pan
2004/05/01 Tools Released for the Removal and the Installation of the Camshaft and the Camshaft Bearings {0700, 0701, 0705}
C15 and C18 Generator Set Engines Valve Mechanism Cover Base - Remove and Install
C15 and C18 Industrial Engines Valve Mechanism Cover - Remove and Install
G3500 Engines Engine Crankcase Pressure (Blowby) - Test
2004/02/01 Improved Gasket for the Rear Crankshaft Seal Carrier {1161}
2004/02/16 Tool Released for Installing Contact Strips for the Charge Drain within the Flywheel Assembly {0785}
G3500 Engines Engine Speed Sensor - Adjust
G3500 Engines Engine Oil Level Regulator
C7 Marine Engine Flywheel Housing
2004/11/01 Improved Fan Drives are Used {1359}
G3500 Engines Crankcase Breather
C15 and C18 Engines for Caterpillar Built Machines Housing (Front) - Remove
C15 and C18 Engines for Caterpillar Built Machines Housing (Front) - Install
C7 Marine Engine Fuel Filter Base
G3500 Engines Fumes Disposal System
3408E and 3412E Engines for Caterpillar Built Machines Injection Actuation Pressure Sensor
C9 Marine Engines and C9 Marine Generator Sets Air Inlet Heater - Remove
C9 Marine Engines and C9 Marine Generator Sets Air Inlet Heater - Install
3126B Petroleum Engine Auxiliary Water Pump