Engine Oil Pan
Show/hide table
Illustration 1 | g01224996 |
Apply 230-6262 Sealant to four areas on the sealing surface of the oil pan. The areas are marked location (Y) . The areas are at the corners of the oil pan in the following locations:
- Connecting joint of the front housing and the front of the cylinder block
- Connecting joint of the flywheel housing and the rear of the cylinder block
Use the following procedure to tighten the bolts for the oil pan.
Tighten four bolts (X) .
Start with bolt (Z) and tighten all remaining bolts in a counterclockwise sequence.
Tighten the bolts to the following torque. ... 30 ± 3 N·m (22 ± 2 lb ft)
Start again with bolt (Z) and tighten all remaining bolts in a counterclockwise sequence.
Tighten the bolts to the following torque. ... 30 ± 3 N·m (22 ± 2 lb ft)
Caterpillar Information System:
2004/05/01 Tools Released for the Removal and the Installation of the Camshaft and the Camshaft Bearings {0700, 0701, 0705}
C15 and C18 Generator Set Engines Valve Mechanism Cover Base - Remove and Install
C15 and C18 Industrial Engines Valve Mechanism Cover - Remove and Install
G3500 Engines Engine Crankcase Pressure (Blowby) - Test
2004/02/01 Improved Gasket for the Rear Crankshaft Seal Carrier {1161}
2004/02/16 Tool Released for Installing Contact Strips for the Charge Drain within the Flywheel Assembly {0785}
G3500 Engines Engine Speed Sensor - Adjust
C7 Marine Engine Gear Group (Front)
C13, C15, and C18 Generator Set Engines Poor Acceleration or Response
C18 Marine Auxiliary Engines Low Power/Poor or No Response to Throttle
2004/02/16 Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
C13, C15, and C18 Generator Set Engines Intermittent Low Power or Power Cutout
2004/03/29 Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
C-10, C-12, C-15 and C-16 Industrial Engines Excessive White Smoke
2004/04/01 Digital Multimeter Group (Clamp on) Rated at 2000 Amps Available for Electric Power Generation Applications {0709, 0785}
C12 Marine Engines Engine Air Cleaner Service Indicator - Inspect
C12 Marine Engines Engine Crankcase Breather - Clean
G3500 Engines Engine Oil Level Regulator
C7 Marine Engine Flywheel Housing
2004/11/01 Improved Fan Drives are Used {1359}
G3500 Engines Crankcase Breather
C15 and C18 Engines for Caterpillar Built Machines Housing (Front) - Remove
C15 and C18 Engines for Caterpillar Built Machines Housing (Front) - Install
C7 Marine Engine Fuel Filter Base