 | |
| Illustration 1 | g01395823 |
(1) Camshaft idler gear
Diameter of new shaft (A) ... 74.000 ± 0.013 mm (2.9134 ± 0.0005 inch)
Distance between the front of the bearing face and the front of the gear face (B) ... 1.08 ± 0.25 mm (0.043 ± 0.010 inch)
(2) Camshaft gear
(3) Tighten the bolts of the camshaft idler gear to the following torque. ... 70 ± 15 N·m (50 ± 11 lb ft)
(4) Align the timing marks on the camshaft idler gear (1) with the holes on the camshaft (2) and the crankshaft gear (5) .
(5) Crankshaft gear
(6) Oil pump drive gear
(7) Apply 9S-3263 Thread Lock Compound to the threads of the oil pump idler gear bolt. Tighten the bolt to the following torque. ... 55 ± 10 N·m (41 ± 7 lb ft)
(8) Oil pump idler gear
Distance between the rear of the bearing face and the rear of the gear face (C) ... 0.75 ± 0.25 mm (0.030 ± 0.010 inch)
Diameter of new shaft (D) ... 28.644 ± 0.013 mm (1.1277 ± 0.0005 inch)