Event Codes
利用本节进行已产生事件代码但没有激活诊断代码的故障诊断与排除。 当产生事件代码时,该事件激活。 任何产生的编码被记录在电子控制模块(ECM)的永久存储器中。
事件代码警告操作员发动机运转状况不正常,如已检测到机油压力低或冷却液温度高。 事件并不表明电子系统有问题。 事件代码还用来指出问题的本质。 在装有 Caterpillar 电子技师(ET)软件的个人计算机上,可以查看事件代码。
Show/hide table
图 1 | g00740986 |
典型实例 |
图 1 显示冷却液温度传感器的输出电压。 如图 1 中所示,请记下传感器的输出电压。 ECM 检测到标示高于正常工作温度的传感器输出电压时,即产生事件代码。
可编程发动机参数
可以通过发动机编程对某些场合执行以下动作:
- 发动机停机
- 发动机报警
- 发动机功率递减
Show/hide table
3500B 系统事件代码     | |
---|---|
事件代码     | 说明     |
E017     | 发动机冷却液温度过高警告     |
E100     | 发动机机油压力过低警告     |
E190     | 发动机超速警告     |
E272     | 进气堵塞警告     |
Caterpillar Information System:
3600 Heavy Fuel Engines Safety Messages
2003/09/01 The New "Gas Customer Service" Web Site is Available on the Caterpillar Intranet {1000}
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Serial Number Plate
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys System Description
G3500B Engines Air/Fuel Ratio Control - Adjust - Charge Density
G3520C and G3520E Generator Set Engines Electric Starting System
C15 On-highway Engine Belt Tensioner - Remove and Install
C15 On-highway Engine Alternator Mounting Group - Remove and Install
C15 On-highway Engine Refrigerant Compressor Mounting Group - Remove and Install
G3500B Engines Electronic Control System Parameters
G3500B Engines Crankshaft - 20 Cylinders
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
3516B Generator Set Engines with Dynamic Gas Blending Test ECM Mode
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys User Interface
2003/09/01 Suspected Oil Leaks in the 3034 Engine Turbocharger {1052}
2003/09/01 Procedure for Connecting the Desired Speed Input from the Load Sharing Module {1264, 1408}
Assembly Instruction for the New 3400 Oil Pump Body Serviced Assembly{1304} Assembly Instruction for the New 3400 Oil Pump Body Serviced Assembly{1304}
Pressure Requirements for the Fuel Transfer System{1256} Pressure Requirements for the Fuel Transfer System{1256}
C15 On-highway Engine Cylinder Head - Install
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Safety Messages
Product Link MODEM Programming with Cat Electronic Technician (ET){7606, 7620} Product Link MODEM Programming with Cat Electronic Technician (ET){7606, 7620}
3606 and 3608 Engines Exhaust Manifold Shield - Remove and Install
C4.4 Industrial Engine Cooling System - Test
2003/09/15 A New Integral Seal Provides Improved Sealing {7555}