Belt Tensioner - Remove and Install
- Release the spring tension on the belt tensioner and remove the belt.
- Remove bolt (1). Remove belt tensioner (2) from alternator support (3).
Note: Place an index mark on the belt tensioner and the alternator support for assembly purposes.
Show/hide table
| |
| Illustration 1 | g01019321 |
- Position belt tensioner (2) on alternator support (3). Install bolt (1).
- Release the spring tension on the belt tensioner and install the belt.
Show/hide table
|
| |
| Illustration 2 | g01019321 |
Caterpillar Information System:
C15 On-highway Engine Alternator Mounting Group - Remove and Install
C15 On-highway Engine Refrigerant Compressor Mounting Group - Remove and Install
G3500B Engines Electronic Control System Parameters
G3500B Engines Crankshaft - 20 Cylinders
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
C15 and C18 Engines for Caterpillar Built Machines Fan Drive
2003/10/01 Improved O-Ring Seals for Fuel Injectors for Longer Seal Life {1254}
2003/11/01 Improved O-Ring Seals for Fuel Injectors for Longer Seal Life {1254}
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Troubleshooting
C15 and C18 Engines for Caterpillar Built Machines Vibration Damper
C15 and C18 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C15 On-highway Engine Alternator - Remove and Install
G3520C and G3520E Generator Set Engines Electric Starting System
G3500B Engines Air/Fuel Ratio Control - Adjust - Charge Density
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys System Description
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Serial Number Plate
2003/09/01 The New "Gas Customer Service" Web Site is Available on the Caterpillar Intranet {1000}
3600 Heavy Fuel Engines Safety Messages
3500B Engines and 3500 Engines with EUI Option Event Codes
3516B Generator Set Engines with Dynamic Gas Blending Test ECM Mode
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys User Interface
2003/09/01 Suspected Oil Leaks in the 3034 Engine Turbocharger {1052}
2003/09/01 Procedure for Connecting the Desired Speed Input from the Load Sharing Module {1264, 1408}
Assembly Instruction for the New 3400 Oil Pump Body Serviced Assembly{1304} Assembly Instruction for the New 3400 Oil Pump Body Serviced Assembly{1304}