New Flywheel Assemblies Used{1156}
Usage:
3208 Industrial ( 90N ) and Truck Engines
Description of Change: New flywheel assemblies are used on the above engines. The new flywheels are needed because of a change in the Spicer clutch that is used with them. The new flywheels permit clearance between the clutch disc rivets and the edge of the wear face of the flywheel. There is no clearance between the rivets and the wear face when one of the former flywheel assemblies is used with the new clutch.
Adaptable As: The new flywheel assemblies are direct replacements for the former flywheel assemblies as shown in the chart.
Caterpillar Information System:
1982/02/01 New Inlet And Exhaust Valves And Exhaust Inserts Available{1101,1103,1105}
1982/02/01 Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01 Gasket Kits{7555}
1982/01/25 New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve{1161}
1982/01/25 Service Recommendation: Clean Hydraulic Filter Housing{5068}
1982/01/25 New Liner Seat Insert With O-Ring Seal Available{1217,1216}
1982/01/25 New Parts Used In Hydramechanical Shut Off; Prefill Oil Pump{7418}
1982/01/25 New Washers Permit Locks To Hold Better{1252}
1982/01/25 New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group{0622,1217}
1982/01/18 New Torque Specification For Bushing{0374,1253,1251}
1982/01/18 Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18 Communicate With Photography{0336,7750}
1982/02/01 New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life{0651}
1982/02/08 New Piston Pin Retainer Used{1214,1225}
1982/02/08 The Service Publications Information Feedback System{0374}
1982/02/08 New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08 Use Microfiche Libraries For Up-To-Date Information{0374}
1982/02/15 New 6V4810 Tool Group Used To Service Vehicles Equipped With VE (Vehicular Environmental) Series Electrical Connectors In Electrical Harness{0610,0620}
1982/02/15 Hose Assembly Moved To A New Position{1274}
1982/02/15 New Camshaft Has Improved Profile (Shape) Of Exhaust Cams{1210}
1982/02/15 New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15 Stronger Spanner Wrenches Now Available{0612,0613}
1982/02/22 Torque/Pressure Conversion Table For 6V200 Hydraulic Wrench{0614,0623}
1982/02/22 Improved Bearing Used In Rear Power Takeoff Groups{3055}