Hose Assembly Moved To A New Position{1274}
Usage:
3406 Truck Engines Used In GMC Trucks
The 9N1849 Hose Assembly in the 9N962 Fuel Filter Lines Group on the above engines has been moved to a new position. This hose assembly now goes around the outer side of the accessory drive housing. It is held to the air compressor air inlet hose near the compressor with a 6K806 Strap. It is also held to the top of the center air inlet hose with a 6K806 Strap.
Formerly, the hose assembly went around the inner side of the accessory drive housing. In this position there was a clearance problem with other components.
Caterpillar Information System:
1982/02/15 New 6V4810 Tool Group Used To Service Vehicles Equipped With VE (Vehicular Environmental) Series Electrical Connectors In Electrical Harness{0610,0620}
1982/02/08 Use Microfiche Libraries For Up-To-Date Information{0374}
1982/02/08 New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08 The Service Publications Information Feedback System{0374}
1982/02/08 New Piston Pin Retainer Used{1214,1225}
1982/02/01 New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life{0651}
1982/02/01 New Flywheel Assemblies Used{1156}
1982/02/01 New Inlet And Exhaust Valves And Exhaust Inserts Available{1101,1103,1105}
1982/02/01 Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01 Gasket Kits{7555}
1982/01/25 New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve{1161}
1982/01/25 Service Recommendation: Clean Hydraulic Filter Housing{5068}
1982/02/15 New Camshaft Has Improved Profile (Shape) Of Exhaust Cams{1210}
1982/02/15 New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15 Stronger Spanner Wrenches Now Available{0612,0613}
1982/02/22 Torque/Pressure Conversion Table For 6V200 Hydraulic Wrench{0614,0623}
1982/02/22 Improved Bearing Used In Rear Power Takeoff Groups{3055}
1982/02/22 New Poppet Valve Will Decrease Chatter{3313}
1982/02/22 Use The Correct Governor For Parallel Applications{1289,1264}
1982/02/22 New Main Bearings And Connecting Rod Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/02/22 Use A Magnetic Chuck To Hold Parts On Work Bench{0626}
1982/02/22 Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22 Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22 New Idler Shaft Used In Fuel Transfer Pumps{1256}