1982/01/25 Caterpillar


Service Recommendation: Clean Hydraulic Filter Housing{5068}

Usage:


Debris and foreign particles can at times be found in the bottom of the hydraulic filter housing on machines with vertically mounted filters. This debris can mix with the clean oil in the tank, when the oil filters are removed for replacement purposes. The debris can then go through the system before it comes to the filters.

A 1P7362 Suction Gun can be used to remove the debris from the filter compartment when the filters are changed. This will keep the debris out of the oil system. This can be done at the regular filter change interval.

Caterpillar Information System:

1982/01/25 New Liner Seat Insert With O-Ring Seal Available{1217,1216}
1982/01/25 New Parts Used In Hydramechanical Shut Off; Prefill Oil Pump{7418}
1982/01/25 New Washers Permit Locks To Hold Better{1252}
1982/01/25 New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group{0622,1217}
1982/01/18 New Torque Specification For Bushing{0374,1253,1251}
1982/01/18 Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18 Communicate With Photography{0336,7750}
1982/01/11 Use FT1555 Generator Rotor Removal Tool To Remove And Install Rotor Assembly{0626,0644,0665,4457}
1982/01/11 "Sirs User Instructions" Available{0374}
1982/01/11 Use Improved Start Switch In Most Applications{1416}
1982/01/11 Procedure Reduces Possibility Of Spraying Hot Hydraulic Oil When S.O.S. Sample Is Taken{0372,5068}
1982/01/11 Improved Head Gasket Has Larger Fire Ring To Decrease Fretting{1101,1201}
1982/01/25 New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve{1161}
1982/02/01 Gasket Kits{7555}
1982/02/01 Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01 New Inlet And Exhaust Valves And Exhaust Inserts Available{1101,1103,1105}
1982/02/01 New Flywheel Assemblies Used{1156}
1982/02/01 New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life{0651}
1982/02/08 New Piston Pin Retainer Used{1214,1225}
1982/02/08 The Service Publications Information Feedback System{0374}
1982/02/08 New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08 Use Microfiche Libraries For Up-To-Date Information{0374}
1982/02/15 New 6V4810 Tool Group Used To Service Vehicles Equipped With VE (Vehicular Environmental) Series Electrical Connectors In Electrical Harness{0610,0620}
1982/02/15 Hose Assembly Moved To A New Position{1274}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.