Use FT1555 Generator Rotor Removal Tool To Remove And Install Rotor Assembly{0626,0644,0665,4457}
Usage:
SR4 Generators
A new FT1555 Generator Rotor Removal Tool (see the illustration) is available for use on SR4 Generators which are used with large engines such as the D379, D398, D399, 3412 and 3500 Series Engines. The lifting tool is used to remove and install the rotor assembly.
The FT1555 Generator Rotor Removal Tool makes it easier to remove and install the rotor assembly. Also, correct use of the tool prevents possible damage to the stator and windings on the rotor assembly.
Make reference to the Service Manual, Form No. SENR7958 for correct use of this tool.
Drawings for the FT1555 Generator Rotor Removal Tool are available from your Division Service Manager.
FT1555 Generator Rotor Removal Tool.
Caterpillar Information System:
1982/01/11 "Sirs User Instructions" Available{0374}
1982/01/11 Use Improved Start Switch In Most Applications{1416}
1982/01/11 Procedure Reduces Possibility Of Spraying Hot Hydraulic Oil When S.O.S. Sample Is Taken{0372,5068}
1982/01/11 Improved Head Gasket Has Larger Fire Ring To Decrease Fretting{1101,1201}
1982/01/11 Check 14 Test Points In Less Than 5 Minutes With The 6V2150 Starting/Charging Analyzer Group{0651,1518,1406}
1982/01/11 Improvements And Test Procedures For Hydramechanical Shutoffs{7418}
1981/12/21 Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/14 New Cylinder Liners And O-Ring Seals Give Longer Seal Life{1216,1201,1213,1227}
1981/12/14 New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group{1272,1288}
1981/12/14 How To Remove The 7L4511 Sleeve Assembly From Aftercoolers{0620,1063}
1981/12/14 Make Sure Coolant Conditioner Elements Are Changed At Correct Intervals{1350}
1981/12/07 New Air Cleaner Group Has Six Clamps For Improved Seal{1051}
1982/01/18 Communicate With Photography{0336,7750}
1982/01/18 Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18 New Torque Specification For Bushing{0374,1253,1251}
1982/01/25 New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group{0622,1217}
1982/01/25 New Washers Permit Locks To Hold Better{1252}
1982/01/25 New Parts Used In Hydramechanical Shut Off; Prefill Oil Pump{7418}
1982/01/25 New Liner Seat Insert With O-Ring Seal Available{1217,1216}
1982/01/25 Service Recommendation: Clean Hydraulic Filter Housing{5068}
1982/01/25 New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve{1161}
1982/02/01 Gasket Kits{7555}
1982/02/01 Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01 New Inlet And Exhaust Valves And Exhaust Inserts Available{1101,1103,1105}