1981/08/31 Caterpillar


FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}

Usage:


Service Magazine, November 3, 1980, Page 5. In the article, "Modification of Puller Bolt Prevents Thread Damage During Removal of Sleeve From Sleeve Metering Fuel System," you were told how to make a modification of the 2H3740 Bolt for this application. This modification has now been released as an FT1632 Bolt.


Dimensions for FT1632 Bolt.

Caterpillar Information System:

1981/08/24 Use Of Different Anti-Seize Compound Prevents Problems With S.O.S. Tests{0680,1203,1218,1219,1225,1226,1227,1230}
1981/08/24 Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24 New Idler Pulley Groups Improve Service Life Of Vee-Belt{1358}
1981/08/17 Comparison And Applications Of Six And Eight Counterweight Crankshafts{1202,1156}
1981/08/17 O-Ring Seal Materials And Applications: Use Only The Correct Seal For The Specific Installation{7555}
1981/08/17 Plastic Plugs Now Used To Hold Piston Pins In Bendix Air Compressors{1065}
1981/08/17 Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17 New Spanner Wrenches Needed To Install Bearings On Marine Transmission Shafts{0622,3300}
1981/08/17 Standard Interval For Oil Changes Now 20,125 Kilometers (12,500 Miles) Or 250 Service Hours{1318}
1981/08/10 New Spacers Used With Larger Valve Springs{1108,1101}
1981/08/10 Different O-Ring Seals Used In Exhaust Gas Recirculation Actuator Group{1080}
1981/08/10 Explanation Of Differences In Timing Advance Information{0374,1250}
1981/08/31 6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}
1981/08/31 Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/09/07 Use Correct Parts In Oil Pressure Relief Valve{1315,1304}
1981/09/07 Plates Can Be Fabricated For Removal Of Spherical Bearings From Hydraulic Cylinders{0651,0623}
1981/09/07 Use Hardware Rack To Keep Small Parts Together During Engine Disassembly And Assembly{0633}
1981/09/07 New Exhaust Gas Recirculation Solenoid Used{1080}
1981/09/07 One-Piece Panel Used For Oil Pan Sound Suppression{7260,1801,1302}
1981/09/07 New Support Prevents Vibration Of Left Side Oil Filters{1306,1318}
1981/09/14 New High Pressure Quick Disconnect Couplers And Nipples For Hydraulic Test Equipment {0651}
1981/09/14 Updated, Improved Issue of Special Instruction, "Bench Testing Hydraulic Components," Now Available {0374,5050}
1981/09/14 Changes To BrakeSaver Groups Give Longer Service Life {1155}
1981/09/14 Troubleshooting: Water Pump Failures {1361,1350}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.