Different O-Ring Seals Used In Exhaust Gas Recirculation Actuator Group{1080}
Usage:
3208 Truck Engines ( 32Y ) Equipped With An Exhaust Gas Recirculation System
Description of Change: Different O-ring seals are used in the exhaust gas recirculation actuator group on 3208 Truck Engines equipped with an exhaust gas recirculation system. Formerly, seals which were made from a silicone material were used in the actuator. These seals did not have enough resistance to heat. This resulted in oil leakage at the actuator. The new seals used are of the viton type which have more resistance to heat. Use of these seals will prevent oil leakage at the exhaust gas recirculation actuator.
Adaptable As: Direct replacement as shown in the chart.
Caterpillar Information System:
1981/08/10 Explanation Of Differences In Timing Advance Information{0374,1250}
1981/08/10 Use Correct Parts In Oil Pressure Relief Valve{1315,1304}
1981/08/10 New Water Temperature Regulator Improves Temperature Control{1355,1354}
1981/08/10 Certification Film Necessary On Engines Adjusted For High Altitude Operation{7557,1251,1257,1264}
1981/08/10 Voltage Converter Assembly Now Available{1400,1410,1561}
1981/08/03 FT1633 And FT1634 Return Cap Assemblies Permit Easier Installation Of Flow Meter Tools{0651,5050}
1981/08/03 New Information System For Engine Gasket Kits{7555}
1981/08/03 Delay Expected In Replacement Of Canceled Service Tools{0651}
1981/08/03 Indications Of High Oil Temperatures In BrakeSaver Circuit Can Be Caused By Wrong Gauge Connection{1155,1159,7450}
1981/07/13 Washer, Seal Added To Improve Oil Filter Assembly{1306,1318}
1981/07/13 Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13 Coolant Conditioner Elements And Their Capacities{1350}
1981/08/10 New Spacers Used With Larger Valve Springs{1108,1101}
1981/08/17 Standard Interval For Oil Changes Now 20,125 Kilometers (12,500 Miles) Or 250 Service Hours{1318}
1981/08/17 New Spanner Wrenches Needed To Install Bearings On Marine Transmission Shafts{0622,3300}
1981/08/17 Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17 Plastic Plugs Now Used To Hold Piston Pins In Bendix Air Compressors{1065}
1981/08/17 O-Ring Seal Materials And Applications: Use Only The Correct Seal For The Specific Installation{7555}
1981/08/17 Comparison And Applications Of Six And Eight Counterweight Crankshafts{1202,1156}
1981/08/24 New Idler Pulley Groups Improve Service Life Of Vee-Belt{1358}
1981/08/24 Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24 Use Of Different Anti-Seize Compound Prevents Problems With S.O.S. Tests{0680,1203,1218,1219,1225,1226,1227,1230}
1981/08/31 FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31 6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}